AM i gonna rub with these... how thin of tires would i have to get

 

should be good. what's the offset?

215/35/18

 

QFT - the offset is key. should be running 35 profile.

 

manufacturer lists 30/40/50. not 100% sure what that means.

http://www.bsa.com.my/web/newfproduct_full.htm look at it here. 18" #321

 

hmmm never heard of 50 offset whee.s that must be a different spec other than offset. hmmmm

 

wow they do list 50 dunno if thats printed right but hey.


i'd go with 35.

 

The Mazda 6's and some Subaru's have insanely high offsets in the high 40s and low 50s.


I sound like a weatherman.

 

What you really have to look at is how they spec their wheels.

They list every single option they have in each category. But they do not list which combination of those options they actually manufacture. These are cheap cast wheels, so you can bet that those options are very limited.

I'd be willing to bet that the only width you can get a +50 offset in would be the 10". There is also no guarantee based on their page that you can even get that wheel in a 4x100.

Your best bet is to talk to a reseller to find what spec they have to fit and xB. If they have 18x8 +35 or +40 in 4x100 you should be good to go.

 

man speaks words that i forget

 

thanx again rton and hotbox for being my toaster mentors

 

found the offset at 42. Got this number on ebay where i found the rim originally. under that center cap, theyre universal 4 lug. i think im gonna run with these. thanx all for the input

 

i have these wheels. i got them from a friend who got them on ebay they were listed as a +40, but they are a +38. either way they are a decent heavy cheap wheel. i am getting some new wheels here in the next month mainly because i need more of a lip... good luck with them!