Ok you guys asked for this.


Ok the two Silver arrows are underneath on that water/dirt guard two long brackets from the bumper mount here.

Ok the three Red are underneath as well they are black bolts 10mm heads, they screw into clips that mount on the water/dirt guard

The Blue are the same 10mm black headed screws they are right by the tires u will see them.

Now the Green is tricky, when u get every other bolt off go after the green, it is the same 10mm black headed screw, but it is hidden in the fender wall, so peal back the guard and u will see the bolt when u get that bolt out work the whole side of the bumper out, it feels like its still bolted but its not it just snaps out

Oh and there is 5 plastic snaps that hold the bumper in on the top the Purple u have to use a Phillips head screw driver for and the Orange use a flat head and just pop them up, There is one in the middle as well.

That’s it!

EDIT by scionlifeguy on 6/30/06
Another topic with pictures of a bumper removal is available here:
https://www.scionlife.com/forums/viewtopic.php?t=39576

 

thanks! it just so happens that i will be taking my bumper off tomorrow, good job!

 

Anyone know if this is roughly the same for the xA?

 

little confusing but stilll great info!

 

What are youj going to do that needs the bumper off?

 

i think removing the headlights requires taking the bumper off

 

I'm installing fog lights.. this is great! Thanks!!

-K

 

I have to trim that bumper support to make room for the intercooler - this helps a lot. Thanks!

 

this thread rokks! thanks for the pic and writing!

 

Haha I need to redo this with photos but im sooooo busy doing all these other tech articles I will do it as soon as i can!

 

Thats a lot of crash foam.

Look at it this way, at least the car will float if it ever goes in the drink.

 

Now what would really be even sweeter is if you accept the Scion Gift card....? Sorry I quick replied to the wrong post (sorry for the bump)

 

Nice! This will help out alot

 

i had a hard time doing this because i am so low, i cant even fit a socket wrench in the wheel well(damn u h techs) so i guess i will have to take the wheels on off in order to do this...

 

ratcheting ended wrenches are your friends.......

 

good info

 

do u need to take the bumper off to replace the grilles

 

Optional. Usually not.

 

 

lol.
5 month bump.