ughhhh im soo ____ed i was just trying to fix my oil pressure gauge and i tryed to untighten it and the part of the fitting that feeds the turbo with oil thats inside the motor the brass fitting just snapped off inside the motor oil started coming out what started as a small thing led to a huge thing now.im soo fustrated with this car.ughhhhh what the hell do i do should i tow it somewere, i dont have much time im a full time student please help me out thanx.

 

Go get a broken bolt remover set. Its a drill bit kinda thing that will back the broken part back out. You have to have a drill though.

 

i think the bolt has lock tight on it and what im afraid of is that the oil will lubricate it and make t hard enough and the locktight together is gonna make it impossible to get this removed.

 

I broke a bolt in the exhaust side of my turbo once which had locktite on it. I drilled a small down the center of the broken bolt....took a bolt remover drill bit and came out without a fuss. Worth a shot.

 

damn man that sucks, is htere any way to get a pair of pliers or anything on the piece that snapped off? i had something similar happen to me, except the oil fitting wasnt in all the way and f'd up the threads in the eninge block and i had to get them re-tapped....was really frustrating. i would ask a mechanics shop near u what u should use to go about getting it out, that or try plumbing supply place

 

ughh i dunno im gonna bring go talk to my mechanic he lives around the block. if he can do it im ognna push the tc and let my bro steer it there lol, did i mention that this isnt the first time i had to push the tc haha. this crap sux that thing is way in there i dunno how the hell there gonna get it out.