|
View Full Version : Scion TC 2G Front Engine Mount torque solution 10-22-2010, 11:52 PM Just a little sneak peak of the very first front engine mount for the 2011 Scion TC. http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs923.snc4/73613_486879199251_187503599251_6885146_2551981_n.jpg Superpickel 10-23-2010, 01:35 AM Is there a listed price available for these yet? torque solution 10-24-2010, 08:23 PM Is there a listed price available for these yet? Should have more info this week. highvoltage1 10-24-2010, 09:22 PM Wow that was quick! greenbean24 11-19-2010, 09:51 PM Any info yet? DustinMorrisTC 11-19-2010, 09:55 PM What would be the benefit of installing these? Sorry if it is a noob question. 1stOne 11-20-2010, 12:00 AM ^Improves shift feel and allows the car to better plant the power by decreasing forward engine movement in FWD vehicles. Depending on the rubber used, the only downfall is engine/cabin vibration. dropzone 11-20-2010, 01:27 AM I have a front polyurethane engine mount on my gen 1 and there is vibration felt through the car when at a stop. When the A/C is on and running it does get worse, now this is when the car is at a stand still. Once the car is rolling it smooths out as if you're on OEM mounts. With this installed the "delay" from when the gas is pushed and the car reacting has reduced, so it is doing it's job, getting the power to the ground. The issue of wheel hop has also been reduced, in the dry the wheels just spin and just adjust the throttle to get the tires to grip. Now in wet conditions I still get wheel hop, shouldn't be trying to launch in this situation but wanted to test it out. I have yet to install the rear motor mount bushing, but whenever I get to that(don't think it'll be anytime soon, it's getting cold outside) I'll report any difference. I also have a B&M short throw shifter installed and getting into the gears have been easier and there's no guessing of the gear and grinding at times is now gone. If one can bear with the vibrations it's definitely a worthwhile mod. torque solution 01-31-2011, 04:18 PM Any info yet? Here is a link. http://www.torquesolution.com/2011-12-Scion-TC-Front-Engine-Mount-p/ts-tc-002.htm Papa_Bear 01-31-2011, 04:59 PM I'll be doing a full review and install video on this on the next couple weeks. Worked with torque solution before and have nothing but great things to say about their products. Quality and fitment always exceeds OEM by far! 1stOne 01-31-2011, 08:28 PM Interested to see the vibration levels. Keep us posted! torque solution 01-31-2011, 09:43 PM Interested to see the vibration levels. Keep us posted! Descendant Racing has one installed in there 2011 TC.:icon_biggrin: |
|