Notices
Scion tC 1G Suspension & Handling Coilovers, Shocks, Airbags, Swaybars...

Original Hotchkiss Tower Brace for tC.........

Thread Tools
 
Search this Thread
 
Old Mar 22, 2005 | 07:50 PM
  #1  
sheep's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
Scikotics
SL Member
 
Joined: Oct 2004
Posts: 1,226
From: Federal Way, WA
Default Original Hotchkiss Tower Brace for tC.........

I am hearing that there was a recall on the original one that Hotchkiss produced for the tC. Is there any truth to this rumor? And if yes, is there a safety issue with it or just because it did nothing for the suspension?
Old Mar 22, 2005 | 10:31 PM
  #2  
-Keith-'s Avatar
Senior Member
10 Year Member
5 Year Member
Scikotics
SL Member
 
Joined: May 2004
Posts: 1,811
From: Nor-Cal Scikotics
Default

why dont u pm him and ask him hes on this site...
Old Mar 22, 2005 | 10:37 PM
  #3  
AllMotoRtC's Avatar
Junior Member
5 Year Member
 
Joined: Jan 2005
Posts: 8
From: 2AZFE CA
Default

Check out this thread

https://www.scionlife.com/forums/viewtopic.php?t=53316
Old Mar 22, 2005 | 11:00 PM
  #4  
Wide_tC's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Jun 2003
Posts: 150
From: Whittier, CA
Default

Bump for AllMotoRTC

Hey Leslie!!
Old Mar 23, 2005 | 11:43 PM
  #5  
sheep's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
Scikotics
SL Member
 
Joined: Oct 2004
Posts: 1,226
From: Federal Way, WA
Default

Sent a PM to Hotchkiss but does anyone else know about this?
Old Mar 24, 2005 | 12:17 AM
  #6  
tckurt's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
N.G.S.O.
 
Joined: May 2004
Posts: 762
Default

I pm'ed him he said it was not true... its completely fine.
Old Mar 30, 2005 | 08:14 PM
  #7  
sheep's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
Scikotics
SL Member
 
Joined: Oct 2004
Posts: 1,226
From: Federal Way, WA
Default

Why did he not PM me back? That is just wrong. But if it is fine, what is the benefit to switching to the new version and why did they request to get the ones that were not sold back?
Old Mar 30, 2005 | 10:22 PM
  #8  
tckurt's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
N.G.S.O.
 
Joined: May 2004
Posts: 762
Default

not sure I just asked it if was messed up...
Old Mar 30, 2005 | 11:07 PM
  #9  
nycazn79's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
Team ScioNRG
 
Joined: Jun 2004
Posts: 382
From: NYC
Default

The original bar was discontinued for a short time a few months ago due to a slight design flaw. When the original bar was installed on the car, in some cases, the bar made contact with the brake fluid reservoir. This was not acceptable and for liability purposes, Toyota and/or Hotchiks redesigned the bar. A recall was never issued for the bar since this wasn't safety issue and the redesign was done to cover their butts in case anything could be remotely connected.
Old Mar 30, 2005 | 11:25 PM
  #10  
sheep's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
Scikotics
SL Member
 
Joined: Oct 2004
Posts: 1,226
From: Federal Way, WA
Default

I bet that is waht is causing the annoying rattling in the engine compartmentthat they will not investigate for me. Thanks for the info nycazn79. Just out of curiosity, where did you find that?
Old Mar 31, 2005 | 12:18 AM
  #11  
nycazn79's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
Team ScioNRG
 
Joined: Jun 2004
Posts: 382
From: NYC
Default

I got the info from Paul @ mcgeorgeparts.com. I got the bar when it first came out, and when it was discontinued, I asked if there was a recall and he explained that they were redesigning it.
Old Mar 31, 2005 | 04:37 PM
  #12  
Wide_tC's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Jun 2003
Posts: 150
From: Whittier, CA
Default

Originally Posted by sheep
Why did he not PM me back? That is just wrong. But if it is fine, what is the benefit to switching to the new version and why did they request to get the ones that were not sold back?
I am sorry if you did not get the PM. I did send it, but was having computer issues that day. There is no problem with the original brace. It just ran close to things and we (Toyota/Hotchkis) decided to improve the distance between the brake MC and the vac valve that is attached to the intake. Hope this helps.
Old Mar 31, 2005 | 07:07 PM
  #13  
sciontc2005's Avatar
Senior Member
5 Year Member
SL Member
Scion Evolution
 
Joined: Mar 2005
Posts: 139
From: EL PASO, TX
Default

so trd or hotchkis?help me out, i want the right goods for my car, springs, sway bars and all, please let me know
Old Mar 31, 2005 | 08:35 PM
  #14  
-Keith-'s Avatar
Senior Member
10 Year Member
5 Year Member
Scikotics
SL Member
 
Joined: May 2004
Posts: 1,811
From: Nor-Cal Scikotics
Default

hotchkis.....
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
StreetStandard
Exclusive Sponsored Sales
2
Jul 6, 2015 10:40 PM
Chopper81
Introduction Forum
1
Mar 16, 2015 07:06 AM
Toy_xbox
Scion xA/xB 1st-Gen ICE & Interior
66
Jan 3, 2006 08:16 PM
Sid_xBicious
Scion xB 1st-Gen Owners Lounge
1
Jun 20, 2004 09:48 PM




All times are GMT. The time now is 07:58 PM.