I was able to pass one of the cars but the camera started to tilt and then eventually flip so I had to cut this video short. Once the footage from outside the car is uploaded, hopefully it will show the pass.

http://www.youtube.com/watch?v=XEWlL0qmZZc

 

very nice..I also noticed no cel....

 

Hey, that car looks familiar. Very cool video. You'll have to get a better camera mount next time.

You still rolling on stock suspension?

And what is the latest with your testing and tuning on the turbo setup?

How is Race Precision coming along?

 

Did you end up passing the 240? That was impressive that you were even keeping up with it (unless it was bone-stock, haha...)

 

There was CEL. Like I said before, if you are running turbo and a stock ecu, the CEL is supposed to be on. Otherwise, youre running too lean. The CEL trips when the ecu sees a fuel mixture more than 13:1 afr, which is still a bit lean for FI. Once you tune the car to the correct afr, the cel will come on. Thats normal.

My suspension is stock except the tein springs. Body roll was a problem on the track so I'll definately need more suspension upgrades. The biggest problem was brake fade, being the rears are drums. I would hang with many of the cars for about 3-4 laps before grip and brakes started to slow me down. The car is running GREAT. Once you learn and know how the ecu works, etc. it runs awesome. This was the last mod I did before the track http://raceprecision.com/forums/viewtopic.php?t=35
New business is coming along great. Still finalizing some stuff but I promise you AWESOME stuff on the way.


You can see from the video that he would pull on my slightly on the straights. That 240 came on a trailer was was NOT stock. I ended up passing two Audis and a Miata. The next video Ill show you guys will be my car and a 350z. We were running even closer than me and that 240.

 

Sweet.