Let's share the problem you have with greedy, this will be easy for other who want to buy the greddy emanager device.

The problem i'm have is

1. Greddy emanager wire bug for throttle position problem.
fix: https://www.scionlife.com/forums/vie...wiring+emanage

2. Greddy emanager problem with car while idle.
fix: havn't found the fix yet! If any one know please post here


Let's share people

 

Do you mean Greddy?

 

no i think he does means Greedy....

 

ops typo, sorry i was tire and my eye is burning by search here.

 

What's this "Idle" problem listed as #2?

 

prolly not a consistent idle, like it dies or jumps up and down to different rpms?

Didnt have either problem with my emangage =) sorry cant help you much....

 

Greedy Emanager ROFL

 

When it's very cold, EVERY tC i've ever seen idle-hunts for a minute or two. Not just ones with emanage.

 

yes, that is the problem,

did you wire as the Greddy instruction with out problem? what else did you do to the emanage?

 

I used the Dezod harness and set the dip switches appropriately. That's it.

But the idle hunting happens on the factory ECU in cold temperatures. It has nothing to do with emanage. If you're dying during idle while it's idle hunting, that's the result of a bad tune.

 

that is what was i thinking, because the problem i have before the tunner say he can't fully tune this thing due to unable reading throttle position. The car is going fully tuned today, i ask in case that was not the problem.

i shuold call them now see what is going on

thanks anyway.

 

DEZOD PnP HARNESS > GREDDY HARNESS
chances are you will have problems if you wire up the greddy harness on your own

 

Also, don't try to tune partial throttle with the e-manage alone, taht may mess up your idle and configuration.

 

Who's your tuner, calvinwch?

I just got mine in and done and tuned... it's idling fine.

 

yup a good tune is all it takes =)

 

If you're in the NYC area, Perry at Ripp is easily the best tuner in the area. You'll never see a problem with his tunes. If it's tunable on the emanage, he'll know exactly how to do it.

 

We got it done...

just got home, with fresh burn smell. it is finish, yippy<<sleepy>>

can't make it to the DPA meet today, anyway will post more pics when i get enough sleep tonight and burning up more tomorrow.