My Mazda RX-8 Turbo Project and Eclipse GSX Project (PICS)
Thread Starter
Senior Member
SL Member
Joined: Dec 2004
Posts: 2,912
From: Gilbert, AZ
My Mazda RX-8 Turbo Project and Eclipse GSX Project (PICS)
For those who don't know, I've been working on a couple of my own time attack cars for the race event I'm putting on next month here in AZ. You can find more information about the event here:
https://www.dezodwest.com/dds.htm
RX-8
-Custom Dezod West components added to a base Greddy Turbo kit.
-Greddy EvoTT exhaust
-Greddy Type-S Coilovers (To be installed soon)
-Apexi AVCR Boost controller
-AEM Wideband A/F Gauge
-StopTech Brake upgrade
-TSW Wheels with Nitto Invo Tires (275/40/1
-Many other misc mods or mods we do not want public yet
Ok guys...
Here's the pics of the Greddy EvoTT exhaust system for the RX-8. It sounds incredible, and the fit and finish are among the best of exhausts I've seen. If you have questions about the exhaust let me know! (Can't list sales here
)
So far so good!
GSX - Specs are minimal for now until I near completion of the build.
So far,
18G turbo, Walbro 190lph, Greddy FMIC, ACT 2900, Tein SS coilovers, Apexi SAFCII and TT, Greddy Bov, K&N FIPK, Apexi N1 downpipe and cat-back, etc...
Pics:
https://www.dezodwest.com/dds.htm
RX-8
-Custom Dezod West components added to a base Greddy Turbo kit.
-Greddy EvoTT exhaust
-Greddy Type-S Coilovers (To be installed soon)
-Apexi AVCR Boost controller
-AEM Wideband A/F Gauge
-StopTech Brake upgrade
-TSW Wheels with Nitto Invo Tires (275/40/1
-Many other misc mods or mods we do not want public yet
Ok guys...
Here's the pics of the Greddy EvoTT exhaust system for the RX-8. It sounds incredible, and the fit and finish are among the best of exhausts I've seen. If you have questions about the exhaust let me know! (Can't list sales here
)So far so good!
GSX - Specs are minimal for now until I near completion of the build.
So far,
18G turbo, Walbro 190lph, Greddy FMIC, ACT 2900, Tein SS coilovers, Apexi SAFCII and TT, Greddy Bov, K&N FIPK, Apexi N1 downpipe and cat-back, etc...
Pics:
Thread Starter
Senior Member
SL Member
Joined: Dec 2004
Posts: 2,912
From: Gilbert, AZ
More of the Mazda will be up as we do more of the build. Right now some parts are unannounced. Thanks for the compliments though. Both will drastically change as time goes on.
Senior Member
SL Member
Team N.V.S.
Joined: Sep 2004
Posts: 13,706
From: Sacramento, CA / Nor*Cal
that exhaust is SEXY for sure , never was impressed by the rx8 , but it's a nice car to drive , just not that good looking IMO or fast enough , the turbo will be nice if it works out well
Member
SL Member
Joined: Feb 2008
Posts: 51
From: Clayton, NC
if your going to run any boost on that 18g get a 255 fuel pump.. Also please tell me you didn't buy the greddy 18g turbo kit .. also might looking into another intercooler.. that model has been know to overheat the car because of the placement of the pipeing, also it's alot of pipe. short route owns!
let me know if you need any help on the eclipse i have built a few. 2.3 stoker 2.1 stroker, 2 2.0s most i put down was 534awhp this was with a basic tune
let me know if you need any help on the eclipse i have built a few. 2.3 stoker 2.1 stroker, 2 2.0s most i put down was 534awhp this was with a basic tune
Thread
Thread Starter
Forum
Replies
Last Post
my06tc
PPC: Engine / Drivetrain
10
Jun 25, 2015 12:18 AM
