xB2: FS: Factory 2012 hands free head unit

Reply Subscribe

Thread Tools

Search this Thread

Sep 17, 2011 | 11:25 PM

kingofthecrate

Thread Starter

Senior Member

SL Member

iTrader: (1)

Joined: Aug 2011

Posts: 158

From: Northeast Los Angeles

FS: Factory 2012 hands free head unit

SOLD

Last edited by kingofthecrate; Jan 5, 2012 at 06:51 PM. Reason: radio sold

Sep 18, 2011 | 07:52 PM

kingofthecrate

Thread Starter

Senior Member

SL Member

iTrader: (1)

Joined: Aug 2011

Posts: 158

From: Northeast Los Angeles

Quote:

Originally Posted by Clean_XB

does it still have usb ipod control and subwoofer control like the '11? RCA preout on rear?

It's got the line out pre (rca) as far as the ipod hookup, they change that in the 2012 models and put the connector under the arm rest but it's fully controlled my ipod so it has to be capable

Sep 20, 2011 | 04:50 PM

kingofthecrate

Thread Starter

Senior Member

SL Member

iTrader: (1)

Joined: Aug 2011

Posts: 158

From: Northeast Los Angeles

Here are pics of the rear of the unit.. Hope this helps

Sep 30, 2011 | 04:51 AM

chicagokid

Senior Member

SL Member

Joined: Jan 2011

Posts: 388

From: St. Louis, MO

Which one is the harness hook up for the Bluetooth? And cable for microphone?

Sep 30, 2011 | 05:06 AM

kingofthecrate

Thread Starter

Senior Member

SL Member

iTrader: (1)

Joined: Aug 2011

Posts: 158

From: Northeast Los Angeles

Quote:

Originally Posted by chicagokid

Which one is the harness hook up for the Bluetooth? And cable for microphone?

I dont have the slightest clue.. someone would need the wire schematic from factory..

Nov 19, 2011 | 11:22 AM

2sv

Junior Member

Joined: May 2010

Posts: 1

Pioneer base headunit T1819 28pin connector pinout?

I try to install a Scion Pioneer base headunit T1819 (PT546-00120) into my Toyota Hilux Pickup. What I need is the pinout of the 28pin connector for steering wheel controls, AUX IN, MIC IN and speed signal in. SCION uses an adapter harness (like in your picture, PT546-00120-CH) to convert the 28pin connector to the standard 20pin and 8pin microphone connector. I allready have the pinout for the 20pin connector, the 8pin connector (not 100% sure) and the connectors to made my own wiring harness.

@kingofthecrate or anyone who has the T1819 radio
Can you publish (or send me) some good photos of the adapter harness so I can figure out the wiring? Or can you draw a schematic or table with the pinouts/wire colors?

Thank you very much
Patrick