Notices
PPC: Vehicles buy or sell cars here...

Any: parting out..please lock

Thread Tools
 
Search this Thread
 
Old 10-11-2011, 05:16 AM
  #1  
Senior Member
10 Year Member
5 Year Member
SL Member
Thread Starter
iTrader: (2)
 
XIEmperorIX's Avatar
 
Join Date: Jun 2007
Location: La Habra, CA
Posts: 3,847
Default parting out..please lock

All the below parts have roughly about 1000 miles or less:
Stance GR+ coilovers
Rotora front and rear slotted discs
Axxis ultimate brake pads front and rear
Rebuilt N/A 5spd transmission
water pump

Also have a racing beat front and eibach rear sway bar along with racing beat endlinks all around, along with the OEM bbs wheels and mazda OEM center caps. I am not selling the center caps alone so don't ask. Email will be ignored.

176XXX on motor.
Salvage title.

Car currently does not run. Long story short - pulleys were not properly tightened down and adjusted after water pump installed and the eccentric shaft pulley managed to sheer itself (along with the bolts) and fall off the car. I still have all the pulleys, the bolts just need to be tapped out and new serpentine belts reinstalled.

Car has an idle issue when cold but otherwise runs fine after warming up.

Price is OBO. Serious buyers only. Would be great for a parts car or a potential shell for a track car

Name:  159c956a.jpg
Views: 67
Size:  38.5 KB

Name:  b11d4ba8.jpg
Views: 11
Size:  52.9 KB

Name:  2011-10-15_12-56-17_214.jpg
Views: 12
Size:  31.1 KB

Name:  2011-10-15_12-57-00_935.jpg
Views: 11
Size:  39.0 KB

Name:  2011-10-15_12-57-38_405.jpg
Views: 29
Size:  38.4 KB

Name:  2011-10-15_12-57-55_222.jpg
Views: 13
Size:  35.1 KB

Name:  2011-10-15_12-58-24_825.jpg
Views: 32
Size:  24.2 KB

Name:  2011-10-15_12-58-46_746.jpg
Views: 9
Size:  24.0 KB

Name:  2011-10-15_12-58-59_1.jpg
Views: 52
Size:  29.3 KB

Name:  2011-10-15_12-59-12_186.jpg
Views: 12
Size:  38.3 KB <---this is where the bolts sheared off..you can see one of the bolts still in their.

Name:  2011-10-15_12-59-47_198.jpg
Views: 10
Size:  37.2 KB

The car was previously red but never got a thorough paint job as you can see from the underhood pics. I also have the fan, shroud, and air box for the car, they are just out because we were working on it and they were in the way. Same goes for the driver side seat. I have that to I just recently sold the Sparco seat I had in their and haven't had a chance to put it back in yet. I also have the center caps for the wheels just didn't want to put them back on quite yet in case we had to take the wheels off for whatever reason

Car is located in La Habra, CA. Email me at DanielSReina@gmail.com for a faster response.


Price is $1600 OBO I will entertain any reasonable offer so if my asking price seems high for the condition don't be afraid to shoot something my way.

Last edited by XIEmperorIX; 11-07-2011 at 04:08 PM.
XIEmperorIX is offline  
Old 10-25-2011, 04:43 PM
  #2  
Senior Member
10 Year Member
5 Year Member
SL Member
Thread Starter
iTrader: (2)
 
XIEmperorIX's Avatar
 
Join Date: Jun 2007
Location: La Habra, CA
Posts: 3,847
Default

dropped price to $1600..also if I don't get interest in the car soon I will probably just part out what I can and junk it.
XIEmperorIX is offline  
Old 10-25-2011, 05:11 PM
  #3  
Senior Member
10 Year Member

5 Year Member

Trader
SL Member
iTrader: (16)
 
yellowxhoodie's Avatar
 
Join Date: Dec 2007
Location: LOWLOW Chicago
Posts: 13,746
Default

Pretty legit price considering is has basically brand new Stance coils and other parts on it.
Id be pretty tempted to pick this up and LS swap it if you were closer.
yellowxhoodie is offline  
Old 10-25-2011, 05:38 PM
  #4  
Senior Member
10 Year Member
5 Year Member
SL Member
Thread Starter
iTrader: (2)
 
XIEmperorIX's Avatar
 
Join Date: Jun 2007
Location: La Habra, CA
Posts: 3,847
Default

Yeah I feel 1600 is pretty fair but I really need to get it out of the garage :/ although doing the math if I sell the parts that are worth anything and either junk or sell the shell then I come out either on top or just a little under what I am asking. Unlike my Works, I'm in a bit more of a hurry to sell this..mostly so I can get my garage back lol
XIEmperorIX is offline  
Old 10-30-2011, 08:08 PM
  #5  
Senior Member
10 Year Member
5 Year Member
SL Member
Thread Starter
iTrader: (2)
 
XIEmperorIX's Avatar
 
Join Date: Jun 2007
Location: La Habra, CA
Posts: 3,847
Default

Last bump before part out
XIEmperorIX is offline  
Old 11-07-2011, 04:08 PM
  #6  
Senior Member
10 Year Member
5 Year Member
SL Member
Thread Starter
iTrader: (2)
 
XIEmperorIX's Avatar
 
Join Date: Jun 2007
Location: La Habra, CA
Posts: 3,847
Default

please lock..going to start my part out...if for whatever reason anyone is interested in my parts go ahead and email me or PM me.
XIEmperorIX is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
DaBlackBox
Scion xB 1st-Gen Owners Lounge
134
04-10-2022 02:04 PM
GoodVibes
Scion xB 2nd-Gen Wheel & Tire
7
03-03-2015 09:47 PM
GrumpyCat
Scion tC 1G Drivetrain & Power
4
02-10-2015 02:52 AM
mischman
PPC: Misc and Lots
3
01-14-2015 06:07 PM
kagero79
Maintenance & Car Care
8
07-10-2008 03:29 AM



Quick Reply: Any: parting out..please lock



All times are GMT. The time now is 04:13 AM.