alright does anyone know how to put tail light smoke covers on. I ordered 2 sets by accidnet off ebay for 75$, meant for 1 set.. But The first set i tried , they are cut to the same shape of the tail light, but are still way to big, and i cant get them to fit, ive done carbon fiber dash kits, and decal stickers, but i cant get these light tint covers to fit.. How do you put them onn. I have one set left and now im gonna have to pay for them now too. any helps thanks

 

are you talking about vinyl covers?

 

yea

 

clean the lenses and area around them, and spray the lenses with a mix of water and alchohol. Then place the film on the beads of water+alcohol, and slide it into place as best you can. Then using a plastic squeege, squeehe the fluid out from under the film and as you do this heat the film with a hairdryer to stretch it and help it to better conform to the curve of the lens. Using the sqeege or your finger nail bend the film slightly into the seam between the lens and body so that you can see the ouline of the lens. Cut the film that goes beyond the lens with a sharp razor blade. Make clean and smooth cuts.

 

are you gunna sell ur other pair?

 

https://www.scionlife.com/forums/viewtopic.php?t=131312