Fig grilles, just like we have been talking about.

 

I can't seem to find matching upper and lower grilles with fog lights. All I can seem to find is the honeycomb lower with fog lights and the mesh uppers. I'd much rather buy an upper honeycomb grille with no emblem than paint the stock grille just so it will match the lower.

 

My bro and I are trying to find a decent grille set for my tc...we have found a couple, but the one that really caught his eye was a carbonfiber mesh grille on ebay for something like 18 bucks. but than i topped him with a full mesh set top bottom and foglights for 75... i like the way they both flow with the white paint...what do you guys think

 

Has anyone ever used IPCW or CarriageWorks?
Please reference this link: http://www.partstrain.com/store/?PN=...universal:0%29

They seem reasonably priced and are what I'm looking for.

 

Anyone wire up one of the lower grills that comes with the fogs in it? I just got mine and of course there aren't any directions. Don't get me wrong, I can see how all the wires connect to each other though I have not unwound them and laid them out as if doing a normal wiring harnass if you will. With that said, I have a couple of questions:

1. Each fog has a snap connector on the wiring behind it. There is a long black wire that appears to connect the two fogs together (snap link on two different leads). Then there is a yellow wire with a different wire end and a red wire zip tied by itself. I am curious if the red one is an extension for the yellow to some form of power?

2. There is a snap link that is labeled "ignition". But where does it plug in?

3. is there an existing hole in the firewall to pass the wire through or do I need to drill one?

4. Is there a trick to popping out the stock switch covers on the dash so I can pop the switch in?

 

VRD