FIVE AXIS tC kit production!
#1
Senior Member
SL Member
Scion Evolution
Thread Starter
Join Date: Aug 2003
Location: SE So Cal
Posts: 811
FIVE AXIS tC kit production!
Hey Guys/Gals,
Five Axis asked me to post this thread to see if anyone would be interested in a LIMITED production of the Five Axis Widebody Full kit. - This would be an exact replica including all the aluminum and plastic shields (with exception to exhaust -not included)
There will be 2 version of the kit available if produced. Only a limited quantity will be produced (maybe with special badging for authenticity).
- Pricing would be around $2,500 w/o carbon and $3,500 w/ carbon fiber .
- deposit of $1,000 would be required for pre-order.
- We would need to at least secure 50 orders before production begins
- Estimated availability would be late this year
- No sponsorship available for this kit
If interested, please post your interest below. If anyone has questions, please contact me directly or e-mail me at alex@scionevolution.com
Five Axis asked me to post this thread to see if anyone would be interested in a LIMITED production of the Five Axis Widebody Full kit. - This would be an exact replica including all the aluminum and plastic shields (with exception to exhaust -not included)
There will be 2 version of the kit available if produced. Only a limited quantity will be produced (maybe with special badging for authenticity).
- Pricing would be around $2,500 w/o carbon and $3,500 w/ carbon fiber .
- deposit of $1,000 would be required for pre-order.
- We would need to at least secure 50 orders before production begins
- Estimated availability would be late this year
- No sponsorship available for this kit
If interested, please post your interest below. If anyone has questions, please contact me directly or e-mail me at alex@scionevolution.com
#3
#5
Senior Member
SL Member
Scion Evolution
Thread Starter
Join Date: Aug 2003
Location: SE So Cal
Posts: 811
please post your comments and/or request in regards to the kit. I will forward the general response to Five Axis.
thx.
thx.
#8
Does it come with the foglights as well?
What about the big hole underneath the headlight, which I suppose is where a turbocharger without an intake would rest.
Also, Would there be any modifications done to the rear bumper to allow a conventional exhaust to sit?
What about the big hole underneath the headlight, which I suppose is where a turbocharger without an intake would rest.
Also, Would there be any modifications done to the rear bumper to allow a conventional exhaust to sit?
#10
Senior Member
SL Member
Scion Evolution
Thread Starter
Join Date: Aug 2003
Location: SE So Cal
Posts: 811
Originally Posted by PunkInDrublic
Does it come with the foglights as well?
What about the big hole underneath the headlight, which I suppose is where a turbocharger without an intake would rest.
Also, Would there be any modifications done to the rear bumper to allow a conventional exhaust to sit?
What about the big hole underneath the headlight, which I suppose is where a turbocharger without an intake would rest.
Also, Would there be any modifications done to the rear bumper to allow a conventional exhaust to sit?
but more than likely it will be produced with conventional exhuast opening...
#12
damn i really want it for my SW tC think it would be PHAT!!!! but that is alot of money. need to know about the exhaust cause i dont want it coming out of the center. where will it be drilled?
#14
Senior Member
SL Member
Scion Evolution
Thread Starter
Join Date: Aug 2003
Location: SE So Cal
Posts: 811
Originally Posted by taek
that would look great,...SW on CF
Also..many of you have posted that the prices seems abit steep.
What would be a fair price so such high quality wide-body kit with limited production?
thx in advance for your input again.
#15
considering the molds are made...
And it would cost at least $400 to run the molds...
and I've never read anything about fit... but I would assume the big cost would be the fit + finish
charging upwards to $3K is taking advantage of the Scion Community!
I would say a reasonable $1500 at MOST for the kit
And it would cost at least $400 to run the molds...
and I've never read anything about fit... but I would assume the big cost would be the fit + finish
charging upwards to $3K is taking advantage of the Scion Community!
I would say a reasonable $1500 at MOST for the kit
#18
Senior Member
SL Member
Scion Evolution
Thread Starter
Join Date: Aug 2003
Location: SE So Cal
Posts: 811
Originally Posted by DuMa
im more interested in the turbo kit it has
And the wide bodykit is not your conventional bodykit design..this includes the fenders, aluminum parts, acrylic glass shields, and obviously top-notch design by big-time automotive design company.
Furthermore, this will be a limited production series.
#19
That would be sweet for those who can actually get a 1 of a kind kit like that.
You might need extra money because you'll be breaking necks on the streets...
...from too much rubbing necking.
You might need extra money because you'll be breaking necks on the streets...
...from too much rubbing necking.