Lets see some tucked tC's!!!

Did some experimenting with my stockers. This is supposedly the lowest i can go in the front with my function form type 2 v2 coilovers. if someone can compare these to B&G's that would be great.
fender to the floor measures 23 inches.


+ the scion key for reference
and i can keep going lower in the rear.
well go back and look at my pics.
the rear was as low as it could go with 2 rings taken out.
if i remember correctly, i had the front as low it could go to, but i still had all the rings in.
so technically i couldve gone a little lower in the front still
the rear was as low as it could go with 2 rings taken out.
if i remember correctly, i had the front as low it could go to, but i still had all the rings in.
so technically i couldve gone a little lower in the front still
woo orange peel!
and shinjitai: how the HELL do your fronts go so low. i took out that gold ring that locks the bottom mount from the top in place, and i'm barely tucking tread on my steelies. hmmmm i'm just hoping its because i'm always parked on a driveway and it's not settling as much quickly as the rears.
and shinjitai: how the HELL do your fronts go so low. i took out that gold ring that locks the bottom mount from the top in place, and i'm barely tucking tread on my steelies. hmmmm i'm just hoping its because i'm always parked on a driveway and it's not settling as much quickly as the rears.
If the F&F are like the B&G's you need to leave the spring perch tight and adjust the shock body down.
I can still lower my B&G's about an inch and a half and I'm already low as hell.
I can still lower my B&G's about an inch and a half and I'm already low as hell.
Originally Posted by Aroddalobster
woo orange peel!
and shinjitai: how the HELL do your fronts go so low. i took out that gold ring that locks the bottom mount from the top in place, and i'm barely tucking tread on my steelies. hmmmm i'm just hoping its because i'm always parked on a driveway and it's not settling as much quickly as the rears.
and shinjitai: how the HELL do your fronts go so low. i took out that gold ring that locks the bottom mount from the top in place, and i'm barely tucking tread on my steelies. hmmmm i'm just hoping its because i'm always parked on a driveway and it's not settling as much quickly as the rears.
Originally Posted by iheartzombies
Shin I just went measure and I'm about 22 and 1/2 fender to the floor, but I can go lower. I can take pics tomorrow.
and Thanks iheartzombies.
Judging by the comments i think B&Gs go lower in the front without taking any rings out and FFs go lower in the rears without any rings out.
I think these 2 coilovers are really great though and pretty hard to compare. FF's for those who want a nice tuck and B&Gs for those who want to be SLAMMED. I should have gone for the B&G's cause i want to slammed like yellow, but im ok with the FF's because i wouldn't be able to turn with my wheels if i went lower.














