What u should do is put the solid roof and put a LCD screen in the sunroof cut out!! Wooh

 

You buyin?!!?

 

I'm just saying it would be sick! Unless u just wanted to fabricate a custom headliner with no holes! Which can't be cheap anyway.

 

ok i got the headliner off and now i ran into a question.
the wire harness has 2 connectors on both sides of it. i know where both the parts that connect to the sunroof motor and dome light plug in. but now the 2 that connect to the car its self r a question. in that kick panel area i found were one harness tip goes but the second connector is bigger and only has 1 pink wire coming from it where does it go!!! any one help me out here plzzzz... and xero as far as a fuse!! i cant figure out what fuse your talking about help me out.

 

I finished!!!!! Finally got everything in working order!!! Except I need to go buy a bunch of new clips.
The process wasn't hard jus time consuming took me about 2 1/2 hours to get it all out and the new one in.

 

you figured out the fuse?. bunch of new clips? did you break some

 

yea I'm an impatient person and those clips on the a pillar realllly ____ed me offfff! LOL oh well as for the fuse it's 22. Mine r numbered different so I compared it to the picture in my manual and it was slot 22 for me but the manual says 33 or something.... It was wack buy I need to rewire the rear dome light

 

really hope you took some pics of all of this. i want to get my t529 hooked up to it

 

No I didnti was working all night it was dark m late I felt lazy to get the camera but what's a t###???

 

haha thats good you got it working your now the second spec tC to do the swap congrats

 

Its what i use to control my windows with my viper alarm key fob. basically i can roll up and down my windows with the key fob. i wanted to do the same with the sunroof.

also, i can get out of my car with the windows down and 30 seconds later when the alarm arms, the windows roll up.

 

agh mmm sounds fun but doubt u need to take it apart to get to the wires

 

well, with that module, i need to get access to the wires that go to the motor after the 'brain'

where is the motor anyway?

 

Right next to the headlamp... U can get to it by taking the headamp off it's just 3 clips.