While I was driving over the last week or so one of my fogs got stoned and has a small hole in it now. The light was fine for a bit but now it is toast ... so I wanted to replace it.

Is it worth it? To pull it fix the hole and then replace the bulb?

Do I HAVE to pull the hole fog like when I did when I installed them or can I just pull it out and replace then reseat the fog?

And what bulb size is it that goes in there? They were not HID.

 

Bulb size is H3. You should be able to pull back the splash guard and unclip the fog from the bumper. How do you plan on fixing the hole since the lens is glass?

 

check the classifieds there are always peeps selling on fog.

 

You could plug the hole clear w/ 2 part epoxy if its probably no bigger than 3/16"

 

Yeah, it is a very small hole. Looks like a bullet hole almost. Small in the front and then exploded in the rear. Its roughly 3/16" in diameter.

 

x2

 

Getting stoned and pooping is indeed an ordeal to behold....

 

That sucks dude

 

I didn't know vrd fogs pooped......that's gotta be a nasty incident, lol

 

LOL