what paint for blacking out grille emblem?
Thread Starter
Senior Member
SL Member
Joined: Jun 2008
Posts: 186
what paint for blacking out grille emblem?
hey what paint does everyone use to "blackout" the scion emblem on the upper grille? does everyone just use a random spraypaint? or is it a car-specific one that is used?
Senior Member
SL Member
Joined: May 2005
Posts: 5,103
From: I'm da BOOM King!!!
From another thread...
You can do this for the front emblem too.
Originally Posted by Hyghgynx
So, I got tired of my plain black rear Scion emblem. I was bored on my day off and decided to paint the "SCION" portion silver. For those that are interested in doing this, here's the materials used...
One "Scion" rear emblem...
One can of Dupli-Color Engine Enamel... (Choose a color of your liking.)
One can of Dupli-Color Acrylic Lacquer...
One Metallic Silver Sharpie...
Quick recap of the painting process;
1. Wash emblem in soapy water. Let dry.
2. Use paint and apply 4-5 LIGHT coats. Let dry completely before adding another coat.
3. Use lacquer the same way as the paint. (Refer to step 2.)
4. Color in "SCION" lettering with Sharpie pen. Have some Windex and a micro fiber cloth handy incase you "color outside the lines".
Your finished product should look like this...
That's all there is to having a sweet looking rear Scion/tC emblem!!
Good job!! You've earned that beer!!
One "Scion" rear emblem...
One can of Dupli-Color Engine Enamel... (Choose a color of your liking.)
One can of Dupli-Color Acrylic Lacquer...
One Metallic Silver Sharpie...
Quick recap of the painting process;
1. Wash emblem in soapy water. Let dry.
2. Use paint and apply 4-5 LIGHT coats. Let dry completely before adding another coat.
3. Use lacquer the same way as the paint. (Refer to step 2.)
4. Color in "SCION" lettering with Sharpie pen. Have some Windex and a micro fiber cloth handy incase you "color outside the lines".
Your finished product should look like this...
That's all there is to having a sweet looking rear Scion/tC emblem!!
Good job!! You've earned that beer!!
remove it with fishing line, put it back on with 3M tape, cut to fit, or silicone adhesive.
BTW, I used flat black on the front grille to match it closer to the grille... that was before I went badgeless on the front grille.
BTW, I used flat black on the front grille to match it closer to the grille... that was before I went badgeless on the front grille.
Thread
Thread Starter
Forum
Replies
Last Post
killahXB2
Scion xB 2nd-Gen Aero & Exterior
4
Mar 29, 2016 04:22 AM
IceBox
Scion xA/xB 1st-Gen ICE & Interior
12
Jun 27, 2006 07:26 PM
Itsdchz
Scion xA/xB 1st-Gen ICE & Interior
10
Oct 13, 2004 01:11 PM
