Dynomax exhaust vid and pic
#1
Dynomax exhaust vid and pic
I haven't seen any pics or vids of a dynomax super turbo muffler so here's mine. The model is 17675, it's a 2.25" side in side out. Only cost's $59 at summit. I used the stock tip, flange, and mounting points for simplicity. It's nice and quite while cruising, has a nice rumble at idle, and it's not too loud overall. Just what I was looking for. It took a little finagling to get it to work with my hitch but I think it looks pretty stock at first glance. Let me know what you think.
CLICK LINK FOR A VID
http://www.supermotors.net/getfile/5...e/mov00007.wmv
CLICK LINK FOR A VID
http://www.supermotors.net/getfile/5...e/mov00007.wmv
#4
Sounds pretty good! Is the tip touching the body? I would try to get about 1/2" at least between the tip and body. Spending over $250 on a 'brand name' exhaust never made much sense to me either so that's why I took Doc Iso's recommendation with the SpinTech muffler.
#9
I'm moving it down a bit this weekend. When I tacked it together the tip had 3/4" clearance. I think I bent it befor final welding. It'll be fixed this weekend. I'll try and take some driving vids as well.
#10
Why not get a different tip as well? Unless you want to have a stock look. I wish I can do my own welding . I wouldnt be driving it arround if I were you until you fix it. I would cry if I burn my bumper.
Thread
Thread Starter
Forum
Replies
Last Post
B_Real45
PPC: Engine / Drivetrain
1
02-23-2015 07:33 PM
gyiu
Regional - Pacific South
12
02-20-2015 04:20 PM