mods please lock. Figured out my problem.
07-26-2008, 09:48 PM
#1
mods please lock. Figured out my problem.
Well my uncle and I installed my crank underdrive, light weight water pump, and alternator overdrive pulleys from NST and I bought the belt (part #K060747) and the belt is to loose.
I've done some searching and everyone (including the tech article on SL) who installs or sells the pulleys says the same part #. I also double checked the part # on the box wit the # on the pulley and everything matches up.
Does anyone have the actual measurements for the belt? Mine is 20mm x 1914 mm
Can anyone confirm this? And I doubt it makes a difference but my tC is an 07 auto.
Need to know ASAP..on vacation and can't exactly drive home if the car can't go anywhere
I've done some searching and everyone (including the tech article on SL) who installs or sells the pulleys says the same part #. I also double checked the part # on the box wit the # on the pulley and everything matches up.
Does anyone have the actual measurements for the belt? Mine is 20mm x 1914 mm
Can anyone confirm this? And I doubt it makes a difference but my tC is an 07 auto.
Need to know ASAP..on vacation and can't exactly drive home if the car can't go anywhere
07-26-2008, 10:01 PM
#2
So far my only thought is Dezod somehow sent me a wrong puelley..any input for this? I know the water pump pulley wasn't available in red so they sent me the grey one. So maybe they sent the wrong pulley entirely? If anyone from Dezod see's this post I can provide my email or any information you need to possibly double check my order.
Thread
Thread Starter
Forum
Replies
Last Post
SkillFreeJake
Scion tC 2G Aero & Exterior
17
07-27-2015 12:34 AM
