Are the front wheel bearings capable of being installed without a press?
90% positive they do, but never hurts the ask.

 

you can get the bearing out without a press but the new one will have to be pressed in because you will damage it beating it in.. does not cost much to get pressed in i did both of mine and it cost 25 each at a local mechanics garage..

 

If you are from the northeast, good luck. You need a press but to be honest all the ones I have done were seized in the knuckles.... FML.

 

Yes indeed you will need a press or you will be sol, you will need it to remove the hub and to re-install it as well