Hi, I bought the Secret Weapon intake.
And I read the FAQ install that someone made.
My question is , First off, my pipe looks different.
And my couplers looks differnt is this normal?
I cant even get the coupler onto the pipe ><
Anyone have any tips?
here are some pics




Here Im showing what part I can not connect.

 

That coupler (the reducer), the big sides goes onto the pipe, the small side to the throttle body.

 

Thats not the side Im having trouble with, its the filter side.
Both the Couplers look the same, is that right?

 

well, u gotta squeeze it in real tite. it isnt just gonna plug in by itself...its a real tight fit, so just keep trying...u got the right stuff tho.

 

k, just making sure its supposed to be super tight, I have been trying for 2 hours, and my hands are getting tired ><

 

good luck guy..

 

ok, I finally got it. Sliced my finger on the pipe while doing it =O.
Damn, I suck, haha. Hope it isnt as hard to get it on the throttle body. ALl the other connections seem super easy.

 

Just make sure you put the flexible reducer onto the throttle body first , and take your time to make sure there is a good seal between the TB and the reducer, and again between the reducer and the intake pipe. I just installed mine two days ago and learned the hard way.

Good luck...

By the way don't forget to disconnect your negative terminal from the battery to reset the ECU. When your done hook it back up and let her idle for five or so minutes before reving it up. That should allow the ECU time to get to know the intake.

 

if you cant get the reducer on the pipe, just put the reducer in the microwave for 30 seconds. and it should be more flexible.

 

I always say a little lube goes a long way.

 

Ones who use would only know.. ahahah

 

Man with a wide body tc speaks the truth. LMAO