does anyone know where the pressure sensor for the boost gauge and the oil pressure gauge are supposed to go? i have the AEM Digital gauges. ive looked and looked and i cant find where they are supposed to go and the instructions arnt very detailed on how to install them. could someone plz plz help me?! im lost, am i supposed to get an adapter or make a new bung somewhere for them??

 

bedtime bump, someone plz help!!

 

Like where to mount them or where to tap in for a signal?

 

i guess where to mount them on the turbo setup for the boost gauge and somewhere in the oil system for the oil pressure gauge. everything else is cake, i just cant figure out where the pressure sensor goes. the instructions say to screw them into the bung, but i cannot find a bung, i guess im either missing it or maybe i need to make one?

 

There are tons of post already on this subject. With install pics, before and after etc and a lot of info. Here are some results of hitting the search button...

https://www.scionlife.com/forums/vie...ht=boost+gauge


https://www.scionlife.com/forums/vie...ht=boost+gauge

https://www.scionlife.com/forums/vie...ht=boost+gauge

https://www.scionlife.com/forums/vie...ht=boost+gauge

https://www.scionlife.com/forums/vie...ht=boost+gauge

 

https://www.scionlife.com/forums/vie...ressure+sender

 

thx alot for the links!!! sry i was wayy to busy to search though all those topics for them . the oil pressure one is perfect but the boost gauge ones dont have any instructions on how and where they installed their pressure sensor. i searched myself and i couldnt find any, so now all i need to know is where and how to hook up the boost gauge pressure sensor for the AEM Digital Gauge, if anyone knows i would GREATLY appreciate it!! thanks again guys and gals!

 

I knew there was a real good post on installing a full set of electronic gauges on the tC. Here is the link:

https://www.scionlife.com/forums/viewtopic.php?t=67002

Complements of Kaeon.