kikcaffine

So I have been asked to make a DIY on how to install a BOV into the stock intake so you can get the hiss hiss noise with out actually having a turbo.

Materials Required:
X-Acto Knife
BOV
RTV Sealant
Vac Line
Vacuum line T-Fitting

So what your going to do is cut your vac line in half and put the t-fitting in it. Then attach your vac line to in. You can put that down for this next step. Now your going to get your x-acto knife out and cut a hole the size of your BOV's flange in the stock intake pipe, by the throttle body. Your going to then insert your BOV in the hole and connect your vac line to that. Now your going to use your RTV and run a nice bead around the bottom of it where it enters the intake pipe. Make sure its air tight or its not going to work properly. If its sealed up correctly it should blow off at you when you rev it up really hard. Sounds just like a turbo but doesnt cost a fortune and keeps your warranty. Make sure the BOV is loosened almost all the way so hardly any pressure is required to open it.

olaHalo

LMAO!!!
sticky this now

Trivecta

iTrader: (1)

is this fo reals?

StreetStarsTc

lol

Ace83

iTrader: (6)

haha are you serious? does it even get that sound? maybe a whistle at its best? there's one that you install on your exhaust and does that bov sound lol

tCtCtC

hes kidding.

UNiT_xEr0

this is pretty lame. bov on a na? so you can scare lil honda's when you drive by rev high and blow them off?

Ace83

iTrader: (6)

hhaha the other got locked! but thats the way to rick roll it lol

Nastos

hahaha at first i was like wtf

Iceman04503

iTrader: (1)

This is too funny.

Nastos

i already ok'd it with the mods should be in the tech section by next thursday.

ADRdesignCo

Just for curiosity... Any sound clips?

aen

haha funny funny,

7:51:25 [Oct 12] kikcaffine: Turbo'd?
7:52:02 [Oct 12] hyeou: me?
7:52:06 [Oct 12] hyeou: nah, im stock
7:53:09 [Oct 12] kikcaffine: Oh
7:53:14 [Oct 12] kikcaffine: why are you trying to build it?
7:53:21 [Oct 12] kikcaffine: for all its stock power fury?
7:53:41 [Oct 12] hyeou: yup
7:54:55 [Oct 12] kikcaffine: Going to turbo it?
7:55:08 [Oct 12] kikcaffine: Wait so how are you a FI section mod then?
7:55:13 [Oct 12] kikcaffine: Make me a S/C mod
7:55:18 [Oct 12] hyeou: yea, i want to put a BOV on the engine
7:55:23 [Oct 12] hyeou: i don't think you have to turbo it though
7:55:29 [Oct 12] hyeou: im going to put it on the intake.
7:59:01 [Oct 12] kikcaffine: Nice
7:59:08 [Oct 12] kikcaffine: I have a write up on that
7:59:13 [Oct 12] kikcaffine: if you want to see it
7:59:16 [Oct 12] hyeou: yea!
7:59:19 [Oct 12] hyeou: seriously man
7:59:20 [Oct 12] hyeou: show me
7:59:23 [Oct 12] hyeou: i think you cut a hole
7:59:29 [Oct 12] hyeou: and get a fitting welded right?
8:00:44 [Oct 12] kikcaffine: Nah dont need welding
8:00:45 [Oct 12] kikcaffine: use RTV
8:00:49 [Oct 12] kikcaffine: ill make a thread in a minute
8:00:53 [Oct 12] hyeou: where can i get that?
8:01:07 [Oct 12] kikcaffine: the rtv?
8:01:09 [Oct 12] kikcaffine: or the thread?
8:01:14 [Oct 12] hyeou: rtv
8:01:18 [Oct 12] hyeou: you're making a thread on SL?
8:01:21 [Oct 12] kikcaffine: Advance Auto
8:01:22 [Oct 12] kikcaffine: Goign to
8:01:26 [Oct 12] kikcaffine: in the FI section
8:01:27 [Oct 12] hyeou: dude
8:01:30 [Oct 12] hyeou: make sure you have the format
8:01:35 [Oct 12] kikcaffine: Oh I will
8:01:38 [Oct 12] hyeou: DIY: blah blah
8:02:14 [Oct 12] hyeou: i'll sticky it
8:02:21 [Oct 12] hyeou: i want that intake that sits in front
8:02:27 [Oct 12] hyeou: like those things that are on turbo cars
8:02:28 [Oct 12] hyeou: haha
8:02:33 [Oct 12] kikcaffine: Ok
8:02:36 [Oct 12] kikcaffine: Give me a few
8:02:38 [Oct 12] hyeou: k
8:08:21 [Oct 12] hyeou: did you finish yet
8:08:28 [Oct 12] kikcaffine: no
8:08:29 [Oct 12] kikcaffine: almost
8:08:30 [Oct 12] kikcaffine: working on it
8:08:49 [Oct 12] hyeou: they made me moderator for FI cuz i asked
8:08:50 [Oct 12] hyeou: haha
8:11:34 [Oct 12] kikcaffine: done
8:12:56 [Oct 12] hyeou: i wonder if this could actually work
8:13:04 [Oct 12] hyeou: unfortunatly i need to lock it
8:13:05 [Oct 12] hyeou: haha
8:15:27 [Oct 12] kikcaffine: I swear
8:15:32 [Oct 12] kikcaffine: let it stay up for a bit
8:15:37 [Oct 12] hyeou: hahaha
8:15:42 [Oct 12] hyeou: i can't believe you did that
8:15:45 [Oct 12] hyeou: you know im turboed
8:15:57 [Oct 12] kikcaffine: I dont pay attention
8:16:01 [Oct 12] hyeou: lies.
8:16:09 [Oct 12] kikcaffine: lies nothing
8:16:15 [Oct 12] hyeou: LIAR
8:16:20 [Oct 12] hyeou: liar liar pants on fire
8:16:24 [Oct 12] kikcaffine: nah ah!
8:17:14 [Oct 12] kikcaffine: see people want it stickied
8:17:16 [Oct 12] kikcaffine: TOLD YOU
8:23:06 [Oct 12] kikcaffine: About to rick roll half of S/L again
8:23:09 [Oct 12] kikcaffine: muahahhahaha
8:23:19 [Oct 12] hyeou: lol
8:23:56 [Oct 12] kikcaffine: meh.
8:24:02 [Oct 12] kikcaffine: Im awesome
8:24:09 [Oct 12] hyeou: hahaha

does it make sense now? lol.

jamessicat25

I've tried it in my brother's 07 tC, this thing actually works.

here's a sound clip for you guys:
http://www.youtube.com/watch?v=5WsaiKb_Arw

Nastos

hhaahaha noooooooo

Trivecta

iTrader: (1)

i realized it would be that at the same time i clicked it..fail

karatekidd

iTrader: (2)

This made my Morning!!!

Greatest Joke ever....gotta return my RTV sealant though

Ace83

iTrader: (6)

you guys dont want this if you're just after the sound?

http://cgi.ebay.com/ebaymotors/Fake-...em#ht_2069wt_0

way cheaper than a real bov

Nastos

dude its a joke no one wants that

karatekidd

iTrader: (2)

That's too funny...just save up and get the real thing...
Great Joke Kikcaffine!!!