With Ultimate can you control when signal is sent to the ignition coil?

 

watching

 

You can advance or retard the ignition timing. It only works in closed loop (WOT), and simply alters the spark timing from the TDC point of the motor.

 

Will that fix my problem?

at 14psi after driving a bit and i sit at idle for like 3-4 mins i blow a coil pack

 

ouch. tough question.

 

Wow wow wow, blown coil pack? How much was to replace it?

 

exactly, and the car sits till i get a answer....

 

I dont unsderstand why you dont just call Paul and find out the answer?

But it is a very sucky and expensive situation...

 

pwned by sema.

Im getting ____ed at this point

 

What does the map look like......how much timing are you puling out at part throttle?

We have had this issue before not on a tC you may need to install diodes in line...I think you can adjust the tune...I can give you the part # next week when i am back at the shop...

ZPI mobile tech support ......over and out

 

Thanks I appreciate it, im rdy to get back on the road!!!

 

Jeff, did St00pid tune it?

BTW, your diodes you need should have been included with the e-manage box from GReddy if I recall correctly. If not, you can scoop some at a local Radio Shack.

 

im gonna try to get the map emailed to me