does any one have any base maps for the greddy ultimate..thankz

 

what size injectors you running? people need more info.. what size turbo? what this what that..

 

t3/to4e on 550cc injectors

 

Where are you located, depending on the air pressure it will "F" with your tune if someone to just hand you a basemap.

I am running the same thing, T3/T4 E54 Trim / .63 AR

Running it on a emanage blue though..

 

You can DL a map to tunker with here:
http://www.dezod.com/tech_notes.cfm

 

paul how good is that base map

 

It's ok. It's good enough to get you started and working in the right direction. It is GReddy's tune for the tC that comes preloaded on their kits.

 

ok that sounds good but wat was the Correction yall did with base map like adjustments for both Fuel and Ignition..thanks

 

? any one

 

dude, there is no universal tune for a turbo tc.

there are many many varibles to take into account that you and your tuner need to dyno and adjust to make it work for your car.

a basemap is just a starting point, a virtually 100% safe tune that is extremely conservative so that almost anybody can use it, but it won't produce very stellar whp numbers.

so start with that, put it on a dyno, and start tuning it.

 

thankz

 

i have been making adjustments with greddy ulti and im tryin to raise rev limiter and its still boncing off the stock limiter can some one please help

 

bump

 

have any body seen V-manage in map select in the greddy ultimate cause i have it and i thought v-manage wasnt a feature in the ultimat unless they updated it

 

have any body seen V-manage in map select in the greddy ultimate cause i have it and i thought v-manage wasnt a feature in the ultimat unless they updated it