just a show of hands of who has checked their crank sensor (ohm). let me know what you got when warm and cold.

had a p0335 pop up on me so i compaired my crank sensor to a spare one I had. got .215kohm on the spare sensor @ 80F ambiant .235kohm @ roughly 100-150f (heated up with a lighter to try and simulate engine oil temp). then tested the sensor on the car and got .158kohm on a warm engine.

Im going to swap out to my spare and see what that does for me.

 

just to add i just got finished swapping out with my spare crank sensor and found that the 09 camry crank sensor is slightly different than a 07 tc but will fit and work. Ill give it a week to see if anything pops up though. you never know.

 

Hey chris great news, just got back from the dyno

Wanna take a guess on #'s?

 

you went without me? you bastard...lol..j/k............sooooooooooo what ya get...id guess 263hp..just an odd guess..lol

 

 

WOW!!!!!!!!!!!!!........I thought my guess was way way over for just 7psi...I know that new turbo is top notch but FFS thats high. would have been great to have a base line stock so you could compair power gained but id assume you gained atleast 120hp-130hp. either way CONGRATS

 

Nice TQ curve!

 

More info on kit!

 

It's a tt v1 kit with an upgraded turbo. Installed and tuned by me.

 

Nice work Chris! PM.

 

Sorry Chris wasn't planning on going, just happened to be in the area with no plans for the evening. The I'm extremely pleased with the numbers though!

 

It's all good brethren, just giving you a hard time. Id be happy with those numbers too if it was me! What's the specs again on that turbo?

 

Thnx Pauly

 

Btw I think I'm close to hitting up the dyno myself

 

It's a precision 5431e CEA w/ .63A/R
http://www.precisionturbo.net/turboc...--5431E-CEA/58

 

Hey crush, you plan on making it over to San Antonio for CCM 11 in November??

 

Welcome Chris! She seems rock solid.

 

I doubt it, Id love to though.

 

found an intresting article

http://autospeed.com/cms/title_The-A...8/article.html

sounds like a fun weekend project.

 

welp I was froggy today and thought id go for a dyno run and a bit of tuning............................well that didnt work out, I went to jtran studios to hop on thier mustang dyno but they were busy, however they did offer to throw my car on for a couple of pulls for 90 bux....yeah i passed on that one. So I called up an old favorite (fwd performance) to see if i could get up on thier dynocom....another fail. they were currently tuning a car on it and said it wouldnt be available for a couple of days.

If Im feeling up to it I may just rent the dyno at fwd performance for a couple of hours, still need to track down one more issue. Iv got the majority of problems nailed down (still need a new pnp harness though).