1. Time in months/weeks you have had it done?

2. Miles you have had it done?/ and mile u have now?

3. Butt dyno?

4. REAL dyno?

5. Vibrations.....when, where, how many, how long, ect. leak also

6. Relate those things in 5 to a timeline, i.e. first 1000 miles, ect.

7. Comments?"problem"

8. If you could start over, would you do it agian?

9. Hard one: Ever test/ notice a difference in running temps?

10.how long did it take you to install it?/u think it can be install in one day?

11.what was the hardest part of the install?

12. what kit do u have ?

13.how many miles till a problem happen if any?

 

1) Almost a year
2) 10,000 miles
3) Hauls ___
4) To be continued
5) None
6) N/A
7) None
Yep
9) Didn't test the before's
10) 8 hrs with a friend and pizza break
11) Intercooler piping & tapping oil pan
12) Turbonetics
13) None

Get your Turbonetics kit here:
http://www.racingsolution.com/produc...neticsTurboKit

 

1. Time in months/weeks you have had it done? from feb to october

2. Miles you have had it done?/ and mile u have now? got it done at 10,000ish had till about 16000ish...the actual kit after i was done with it had well over 50,000ish miles

3. Butt dyno? didnt do one

4. REAL dyno? 222whp/214ftlbns of tq

5. Vibrations.....when, where, how many, how long, ect. leak also. Vibrations came from Stiffy(engine damper) small oil leak cause of the return line that was about it

6. Relate those things in 5 to a timeline, i.e. first 1000 miles, ect.

7. Comments?"problem" me doing the install myself

8. If you could start over, would you do it agian? oh yeah

9. Hard one: Ever test/ notice a difference in running temps? didnt do a test

10.how long did it take you to install it?/u think it can be install in one day? 10hrs spilt up into 3days

11.what was the hardest part of the install? the oil pan

12. what kit do u have ? HAD zpi stage 1

13.how many miles till a problem happen if any? 0 from the kit after about few hundred miles cause of our dumb butts

 

 

1. Time in months/weeks you have had it done? Weeks and Months don't work in my case: Dec 05 - Motor still not in car as of today.

2. Miles you have had it done?/ and mile u have now? ZPI kit was installed at 9k (after my 1000 mile trip up there) motor blew up at 11500 (after my 1000 mile trip back) so I had 1500 miles of boost and 18 months of a rebuild.

3. Butt dyno?

4. REAL dyno? When it's all said and done, building for 650 but will detune down to 400 or so.

5. Vibrations.....when, where, how many, how long, ect. leak also N/A

6. Relate those things in 5 to a timeline, i.e. first 1000 miles, ect. See above

7. Comments?"problem" See above

8. If you could start over, would you do it agian? Hell No!

9. Hard one: Ever test/ notice a difference in running temps? N/A

10.how long did it take you to install it?/u think it can be install in one day? Not what I'm doing! Hell it took ZPI 2 weeks to install my "custom" kit.

11.what was the hardest part of the install? Living without my car and living with my car payment for the last 18 months.

12. what kit do u have ? Was ZPI stage 1, now it's all fully built and custom.

13.how many miles till a problem happen if any? See above and read it twice or three times.

 

1. Time in months/weeks you have had it done?-2months

2. Miles you have had it done?/ and mile u have now?-9000/10K

3. Butt dyno?-1000HP!!! J/K! Pulss HARD!!

4. REAL dyno?-240HP/240TQ

5. Vibrations.....-throttle body pipe like to hit the windshield wiper housing.

6. Relate those things in 5 to a timeline, i.e. first 1000 miles, ect.

7. Comments?-Couple came off a pipe and scared the ____YE outta me! Fixed it though

8. If you could start over, would you do it agian?-FRICK YEA!

9. Hard one: Ever test/ notice a difference in running temps?-Run's cooler at highway speeds

10.how long did it take you to install it?/u think it can be install in one day?-A week. I'm lazy

11.what was the hardest part of the install?-Intercooler and piping!

12. what kit do u have ?-Treadstone

13.how many miles till a problem happen if any?-No problems.

 

what is so funny about that??

 

but dyno...means, after the install did u feel the pull different.....stock to F/I

 

If you have to have it explained to you, you'll never think it's funny.

Sorry.

 

1. Time in months/weeks you have had it done?
Four days.

2. Miles you have had it done?/ and mile u have now?
40mi.

3. Butt dyno?
Faster than a 6spd RX-8.

4. REAL dyno?
TBD, haven't hooked it up at the dyno at work.

5. Vibrations.....when, where, how many, how long, ect. leak also.
No vibrations.

6. Relate those things in 5 to a timeline, i.e. first 1000 miles, ect.

7. Comments?"problem"

8. If you could start over, would you do it agian?
Yes.

9. Hard one: Ever test/ notice a difference in running temps?
Yes, IATs are higher as well as EGTs.

10.how long did it take you to install it?/u think it can be install in one day?
100% custom kit, two weekends.

11.what was the hardest part of the install?
Downpipe.

12. what kit do u have ?
My own, built it myself.

13.how many miles till a problem happen if any?
No problems as of yet.

 

1. Time in months/weeks you have had it done?
About a week now

2. Miles you have had it done?/ and mile u have now?
41,000 now at around 41,200

3. Butt dyno?
Weee around 220 I need to lean it out.

4. REAL dyno?
not yet.

5. Vibrations.....when, where, how many, how long, ect. leak also
none

6. Relate those things in 5 to a timeline, i.e. first 1000 miles, ect.
none

7. Comments?"problem"
none except some modifications needed for the install.

8. If you could start over, would you do it agian?
hell yah

9. Hard one: Ever test/ notice a difference in running temps?
nope

10.how long did it take you to install it?/u think it can be install in one day?
16 hours in the rain and cold.

11.what was the hardest part of the install?
dropping the oil pan and routing the charge pipes.

12. what kit do u have ?
Dezod Stage 1

13.how many miles till a problem happen if any?
none

 

1. Time in months/weeks you have had it done?
4 months

2. Miles you have had it done?/ and mile u have now?
Installed at 25k miles, I'm over 31k now.

3. Butt dyno?
Butt = kicked

4. REAL dyno?
221 WHP/210 WTQ from a Dyno Dynamics dyno

5. Vibrations.....when, where, how many, how long, ect. leak also
No odd vibrations. Only leak is due to the oil return

6. Relate those things in 5 to a timeline, i.e. first 1000 miles, ect.
Huh?

7. Comments?"problem"
Only issue is a Fouled o2 sensor that happened when my emanage ultimate chip went bad

8. If you could start over, would you do it agian?
Yes - with a different kit though

9. Hard one: Ever test/ notice a difference in running temps?
Yes - the engine heats up faster.

10.how long did it take you to install it?/u think it can be install in one day?
about 12 hours of labor, not including tuning. It took a day and a half at a shop w/ welding tools, etc. If you're not experienced and you don't have the right tools, it'll take longer

11.what was the hardest part of the install?
Getting the charge piping to fit (Auto tranny dipstick made fitment tough)

12. what kit do u have ?
GReddy Turbo with fuel management option 2 (Emanage Ultimate & 440cc injectors)

13.how many miles till a problem happen if any?
No problems yet

 

people and their butt jokes

 

1. Time in months/weeks you have had it done? December '06 - Present

2. Miles you have had it done?/ and mile u have now?
Installed it at 10k on the car, now I have 17k

3. Butt dyno?
Yup, It was amazing, my butt felt amazing afterwards

4. REAL dyno?
Nope, I want to have it done soon, but my life doesnt permit me time to go get it done.

5. Vibrations.....when, where, how many, how long, ect. leak also
No vibrations, I did have a leak that was making my exhaust blue, i recently sent in my turbo for warranty, I blew a seal.

6. Relate those things in 5 to a timeline, i.e. first 1000 miles, ect.
started at about 7k miles on the turbo

7. Comments?"problem"
No problems really, sometimes it would stall after driving a short distance after a cold start. But it stopped doing that after about 2k miles.

8. If you could start over, would you do it agian?
Hell yea, I will do it to any car I get in the future too

9. Hard one: Ever test/ notice a difference in running temps?
No, Dont have the equipment to really test it well, However, stock engine temp gauge never changed, it just gets to normal running temps a lot quicker.

10.how long did it take you to install it?/u think it can be install in one day?
14 hours broken up over 3 days, keep in mind, i started with no tools and had to run to the hardware store 9billion times. Now I have a full set of tools
As well, I am not a mechanic and really have no mechanical background, so the whole thing was a learning experience

11.what was the hardest part of the install?
Tapping the oil pan, i swear that took me like 2-4 hours, i was about to punch someone in the face. That and getting the turbo assembly mounted to the block, the alternator gets in the way

12. what kit do u have ?
Turbonetics Stage 1 for the A/T

13.how many miles till a problem happen if any?
like in the question above, the blown seal happened about 7k miles into it.
But turbonetics has a 1 year/12k mile no fault no hassle warranty, so it's all good.

 

bump . . . . . just want some more feedback

 

I would like to hear from people with stg0 kits

 

1. Time in months/weeks you have had it done? Since January 07

2. Miles you have had it done?/ and mile u have now? done at 35000, now 38000ish

3. Butt dyno?enough to get my butt melded to the seat

4. REAL dyno? about 280whp

5. Vibrations.....when, where, how many, how long, ect. leak also: currently got the usual tC rattles in the rear, exhaust turbo seal is shot at the moment( my fault ), had a leaky coolant line on the turbo, hot,cold,hot,cold will do that.

6. Relate those things in 5 to a timeline, i.e. first 1000 miles, ect. as of mid april, a week after finishing my exhaust is when the seal decided to suck oil.

7. Comments? great kit, but not worth what i payed and how long i had to wait

8. If you could start over, would you do it agian? with a Supra, not this car

9. Hard one: Ever test/ notice a difference in running temps? little higher on the oil temps but coolant temp was fine

10.how long did it take you to install it?/u think it can be install in one day? 3 days of 10 hours each, then had to wait on parts for most of a week to finish it.

11.what was the hardest part of the install? that F**KIN oil pan, electronics wiring even with plug and play harness, fuel return line

12. what kit do u have ? Sound Performance stage 1 w/ BB option/ 10psi (what the dyno said, should be a 8 psi spring)

13.how many miles till a problem happen if any? none that wasnt caused by the install or beating on it

 

bump! cmon, i need more input

 

ttt

 

come on people .. . . . . .wanna see some zpi and dezod info