Introducing new oil line options for the Dezod kits.
#1
Introducing new oil line options for the Dezod kits.
For those that have not seen it yet, we are now offering new oil line options for the turbo systems. The feed system remains the same as a Stainless Braided piece with all of the appropriate fittings and such. The return systems are now what's different.
Starting very soon you will have 1 of 2 options for return:
1) Option 1-Push on with rubber lines. This set-up is ideal for the person who wants it done quick and painlessly. This system consists of a drill the oil pan and go method with all AN fittings instead of the old brass stuff.
2) Option 2-Swivel AN with stainless braided lines. This set-up is for the guy that wants a perfect leakless option. It consists of all swivel AN lines assembled by Dezod with an aluminum weld in bung for the pan. A little more hassle, but a lovely option.
Respectfully found here:
http://www.dezod.com/cat_diy_turbo.cfm
Starting very soon you will have 1 of 2 options for return:
1) Option 1-Push on with rubber lines. This set-up is ideal for the person who wants it done quick and painlessly. This system consists of a drill the oil pan and go method with all AN fittings instead of the old brass stuff.
2) Option 2-Swivel AN with stainless braided lines. This set-up is for the guy that wants a perfect leakless option. It consists of all swivel AN lines assembled by Dezod with an aluminum weld in bung for the pan. A little more hassle, but a lovely option.
Respectfully found here:
http://www.dezod.com/cat_diy_turbo.cfm
#6
No welding is required on the older set, the reason why they are available on the website is because we have to finish burning through the old stuff.
Check out the install linky for some more info: http://www.dezod.com/files/DZMTCS1V1.4.pdf
Check out the install linky for some more info: http://www.dezod.com/files/DZMTCS1V1.4.pdf
Thread
Thread Starter
Forum
Replies
Last Post
my06tc
PPC: Engine / Drivetrain
10
06-25-2015 12:18 AM