I have been searching and searching about those two rods and havent find much .. If you have experience with any of them post it up .. Which one is better have been prove to hold more power .. Post ur experience or answer if you know it..
do they hold 600hp+

 

Im using the BC Sportsman rods, never had an issue. For reference my cars made 656whp, and has even went through a couple mishaps with a blown hg and melted piston, still yet to have a rod issue. Sorry I cant comment on the two you mention, just thought Id throw my experience in the mix.

 

I agree BC FTW!

Sent from my SGH-T999 using Tapatalk 2

 

I have manley rods and have gone up to 25-27 psi on a 6262 turbo and spinning the crank at 8k.. but to be any after market name brand rod should get you some serious power.

 

also it depends who puts it together and tunes it. I have seen civics blow built ____ just on a 15psi street tune.

 

Dezod is the one that is gonna built my short block and when im rdy for the big power im gonna tune with (m tuned).. Looks like alot of people have experience with bc rods .. The jessicas scion tc on youtube dyno at 662whp and have bc rods also

 

Manely Rods will be the rods I use for my build.

 

Manley are great also!

Sent from my SGH-T999 using Tapatalk 2

 

I have heard alot of good things about bc rods .Some people here has them with 600hp+ and also the jessicas scion tc on youtu made 662whp and has bc rods to .. So looks like im gonna buy bc sportsman rods ..

 

Like K1 used to be a super well respected affordable rod, Molnar is now it's successor. Same engineer. Same recipe. Higher quality. Believe me, better than K1 as of recent by light years.

 

Didn't realize Manely made two rods for the 2az. The Turbo Tuff I-Beam and they make a cheaper H-Beam rod for it.

Mine will be the Turbo Tuff I-Beams.

 

ibe heard good things about .. Bc sportsman rods .. manley and molnar .. people think that molnar rods is a bad set of rod cus is only $395 ... I know how it feels when u are going to buy anything u never want to buy the cheaper one .. is most cases money = quality ..
More $ better quality .. Whats better a car that worth 10k or one that work 50k

 

I have the money ready to buy the rods and still havent decide which one to buy .. thinking manley but i see so many rods that cost 410 to 600 that are cheaper that i dunno .. hope i can decide to buy the rods today

 

turbo tuff

 

i see it cost too much compared to other rods and some companys have told me they weight too much and it is bad in the long run so im considering opinions on buying the brian crower bc625+ or other option

 

What rods weigh to much? Manley Turbo Tuff's? Never heard anyone say anything about their weight, they are pretty proven to be sound in quality. I think they are rated at something like 1000hp.

 

I end up buying manley rods i beams .. Everyone talk good about them and everyone cant be wrong