Well, I hoped to have a lot of work done by the end of the summer - but you know what they say, Time's fun when you're having flies....

But come a week from today, I MAY finally be done with my little SC project. It will consist of:

The TRD SC
Forge 007 Diverter
RippMods Water/Meth
RippMods Custom CAM (woo hoo! I'm the first to have one of these babies!)
Greddy E-manage Ultimate with Dezod PNP harness (assuming the GB happens, he has my money though)
Alphawerks Header
Draxas full exhaust
NST 12lb pulley
NST lightened WP and Alt pulleys (though I doubt these will factor in)

Everything is done except the E-manage, Cam & tune with a 12psi pulley - which I HOPE to have done a week from today (the 15th) and in time for VIP.

Now, at Ripp with an e-manage tune + headers & exhaust, he was able to get 238WHP with a conservative tune - and that's at STOCK boost (measured 6psi).

I'm hoping to see that + an additional 30-50 with the custom cam.

It's going to be a very interesting saturday indeed. I'll post numbers/dynos once it's all said and done. The big X factor at this point is what the additional boost will net.

(Oh, and to the turbo'd folks - no need to hate in this thread

 

Sounds awesome! Cant wait to see this completed and the car running! Make sure to post some pictures too!

 

Definitely bringing the camera.... maybe I'll get someone to lend me a camcorder too.

 

sounds good!

 

nice man, Im very intersted in seeing your results

 

The funny thing is - I'm getting my supercharger mounting bracket swapped out the day before. Maybe i'll just have him give it to me to install on Saturday since all the parts will be off anyway.

 

mad props ice!

 

Watching

 

Watching for the cam, I need more toys now, lol

 

whats the cam install date?

 

Vito you better watch out there is gonna be a new Beast in the East...

Sounds like you have one hell of a setup going IceNine..cant wait to see the how it all turns out.. :D

 

9/16.

 

Me either! There's a bit of risk involved, since this is the first cam he's made for a Vortech SC on a tC with somewhat crappy internals.... But man, the potential is there!

 

Has he mentioned what he might sell them for?

 

karl - I think you should think about what else you can replace since you need to get the cam work done.

 

I think if I did it I'd get a pnp and throw some pistons in

 

yea - thats what I was thinking

 

watching, congrats IceNine

 

and change the title to people can see the thread. its good for people to read on whats up.

 

watching and drooling over the cams.