The entire fan assembly was removed and replaced with 2 slimline push fans that were placed in front of the radiator.
Plenty of room in there now!

 

Can I see a few pics of the fans and room on back of the radiator? PM links if they are still "under-wraps". :D

 

The ones with the bumper off are on my home pc. I'll get some good ones from inside the engine bay when I pick it up tonight, and post by this weekend. But I think you could see it in one of Brett's shots. I'll see if I can find it.

---edit---
I just looked at Brett's "gettin her ready" thead and you can just barely see that the old fans are removed and just catch a glimps of the new fans in front, but you can't really see the space it created for the turbo and pipes, so I'll take some tonight or tomorrow for you.

It's funny, cause when I went to the meet to see the 2 zpi 0 guys here, they were complaining about clearance, so I showed them the fan setup. The were both amazed and are thinking about doing it themselves!!!
Nice job Todd!

 

wait, why did you have to remove the fans? do they hit the manifold or piping or something? whatever you had to do, im have to do the same thing

 

i took off my fans also and got slim fans. makes so much more room.

 

Where can I get these slim fans?

 

They come with Todd's kit. It's part of the normal install for the TT kit. Don't freak out, bro.

 

i got mine at shucks, there just 10in fans that are slim

 

haha i didnt know that. i was like "when will the list of things needed end?!"

 

Much better pic of my setup:

 

OK, here is a full shot of my TurboToyotas Stage 1 kit:

If you wanna see more, see my thread here:
https://www.scionlife.com/forums/vie...784171#2784171

 

Here are a few pics of my beast!

 

Bump...............Took me way to long to find this post and we need to update it

 

Few of mine.

 

Sweet ^^

 

 

HOLY CRAP! I completely forgot about this thread, and I don't think I posted anything after that initial teaser pic!
Here goes:

Dyno first: 252whp at 5psi


A snail and some worms:



Full shot:



Here's my favorite shot:



And the Vacum block. Pretty sweet!



But I'm sure this is all anyone wants to see:






Someone wanted to see pics of the clearance with fans in front, so here's that:



Fans up front:



No cutting for the intercooler:



Kit includes a 2.5 inch down AND S-pipe:



That oil pan fitting had the dump tube blasting on it and was leaking.



Got it welded:



Intercooler:



Hot side pipe hanging low:



See:



Cold side REALLY low:



See:



Oh, and this $hit gets HOT too! Check out the melted plastic wire loom:



Here is my ATI Gaugepod from outside:



Gaugepod from the side:



and Gaugepod from inside. Those switches were going to be for scramble boost and datalogging, but we didn't do that, so they are non funcioning switches:



But check out the SWEET AEM F/IC install! They pulled the stock ECU out and rotated it so they could mount the AEM behind the glove box! Then routed the usb cable down the side and left it under the floor mat, so we can just plug up and log or tune!



And here is a wink from my installer:



He says the bumper should be on there!:



Well, what do you think?

 

I think it kicks ___ ^^

 

THANKS! I'd have to agree!

 

So when am I going to be able to go for a ride..................