Spd_Rcr Getting A Make Over! (Username change mmmpshh) Might be making a comeback..
Thread Starter
Joined: Aug 2009
Posts: 2,524
From: Oklahoma City From Brooklyn NYC
^ screwed it up trynna sand it down then got fustrated and wanted to see what it looked like with a wrinkle finish... did not come out good. Im actually thinking of doing this V with just the pieces for the outside of the waterfall
http://www.autoaccessorystore.com/pr...t/Default.aspx
or Im gonna have to get another waterfall and have someone who knows what they r doin (not me) paint it
http://www.autoaccessorystore.com/pr...t/Default.aspx
or Im gonna have to get another waterfall and have someone who knows what they r doin (not me) paint it
Thread Starter
Joined: Aug 2009
Posts: 2,524
From: Oklahoma City From Brooklyn NYC
well Im pretty ____ed. Had a nice day, had a photoshoot with my car (will post piks tomoro) only to scratch the ____ outta my rim on a damn curb. Almost have of the rim got scratched... so damn ____ed. So now Im jus gonna say f' it and get it fixed and go for purple.
Thread Starter
Joined: Aug 2009
Posts: 2,524
From: Oklahoma City From Brooklyn NYC
Some piks from my photoshoot! Will do another next weekend when my spacers get here and my wheels are finished getting purplized (dropped em off today)






















something is off w/ you front end. it looks like its being pushed to the left side, and the ic and oil cooler look uneven and not level. normally i wouldn't care. but since you pretty much went the show car route, you should take off the fascia and line everything up. nice pics though.
Thread Starter
Joined: Aug 2009
Posts: 2,524
From: Oklahoma City From Brooklyn NYC
something is off w/ you front end. it looks like its being pushed to the left side, and the ic and oil cooler look uneven and not level. normally i wouldn't care. but since you pretty much went the show car route, you should take off the fascia and line everything up. nice pics though.
thanks, and u r right, it is un even. gotta get around to fixn it. When I first swapped to manual (1st time ownin one) I slipped off the clutch and ran over a damn parkin block and it pushed everything up. I gotta take off the tab that was welded on to the core supprt that holds the intercooler and either bend it back or replace and everything will line up. Its also throwin off my horns, thats actually when I realized how bad it was. But I will do it when I get the brace made for the front of the intercooler for a lil more support
thanks, and u r right, it is un even. gotta get around to fixn it. When I first swapped to manual (1st time ownin one) I slipped off the clutch and ran over a damn parkin block and it pushed everything up. I gotta take off the tab that was welded on to the core supprt that holds the intercooler and either bend it back or replace and everything will line up. Its also throwin off my horns, thats actually when I realized how bad it was. But I will do it when I get the brace made for the front of the intercooler for a lil more support

































