took apart the s/c found the seal part number on the seal is 2A060-12. the rubber/plastic is chiping off. i was wondering how do i cross reference this piece? the dimensions are 18mm X 30 mm X 10 mm. is it easy to find?

 

What part did you pull the bearing from ? only the pulley side should have a rubber seal. The rubber seal is part of they skf 6205 /rs bearing. The only other seal is the viton seal on the shaft.

 

^ no there is an impeller shaft seal aswell. Your looking right at it. Thats a vortec specific part number.
VORTECH Seal 2A060-12
viton seal single/double lip covered steel:
24mm or 25mm
40mm
7mm

 

Thats the viton seal ? looks like one of the skf bearings

 

no its a hard plastic seal. that maybe the wrong part number I pulled up. I grabbed it form another website

 

yea the part number is 2a060-12. i wanted to see if there was a possibility of a cross reference to that seal. it seems as if it spring loaded.

 

It is. I thought it was a plastic seal that was against a rubber o-ring.