tom0613

iTrader: (2)

I droped off my cylinder to the machine shop to get port & polished. Now the question, I purchased Brian crower's complete valve train and the machine called me and asked me do I have after market valve keepers. When I called crower they said they don't make any for a TC so I wanted to know if u guys are just using OEM valve keepers. If after market were did u get them I checked out dezod and ptunings website and could not find anything.

Syldrin

iTrader: (1)

if it's not on dezod's website it doesnt exsist. well thats not true but it isnt commonly used. why not give ptuning a ring and ask them?

weezyfbayba

2 agressive springs will eat the cam lobes right up down to nothing

tom0613

iTrader: (2)

I have there cams too

trd07tc

iTrader: (-1)

Get new OEM keepers and you should be good to go

1slowtc

5.5 mm. Radial Groove. Use with Ferrea Titanium Retainer # E11075

tom0613

iTrader: (2)

^^^^^can this be used with crower hardware

1slowtc

Yes

tom0613

iTrader: (2)

Thank u

1slowtc

No problem..

Ace83

iTrader: (6)

supertech makes them too i believe