getting there slowly....
Thread Starter
Senior Member



Strictly Scionized
SL Member
Joined: Oct 2004
Posts: 1,284
From: White Marsh, Balti Co., MD
Just installed the RS180s in the other day.

No deadner yet...

back of the woofer:

7inches of loving natural sound.
Next up some tweeters then a 4 channel amp to power them.

No deadner yet...

back of the woofer:

7inches of loving natural sound.
Next up some tweeters then a 4 channel amp to power them.
Thread Starter
Senior Member



Strictly Scionized
SL Member
Joined: Oct 2004
Posts: 1,284
From: White Marsh, Balti Co., MD
Nope just power off the AVIC-D3
It is a little quieter than the stock speakers but I there is not distortion though. Still doing a little research on tweeters.
The amp I might go with the kicker sx700.4 since it has onboard dsp but no T/A though. It will serve as a temp solution until I can afford something like the RF 3Sixty.2.
Going to deadend the doors in the spring when it starts to get warm again.
It is a little quieter than the stock speakers but I there is not distortion though. Still doing a little research on tweeters.
The amp I might go with the kicker sx700.4 since it has onboard dsp but no T/A though. It will serve as a temp solution until I can afford something like the RF 3Sixty.2.
Going to deadend the doors in the spring when it starts to get warm again.
Originally Posted by Dakine
make sure u coat the mdf with protectant. it might rot over time.


