I am trying to run my RCA wires into a LOC and from the LOC into my stock HU. What wires do I connect the LOC wires to and how? How do I make the LOC wires connect with the stock wires?

What wire do I connect the remote wire from my amp to?

 

go here..... it'll tell you all you need... http://home.cfl.rr.com/icdedppl/faq.html#c12

 

What wire do I connect my remote wire to??

What wires do I connect the wires from the LOC to?

And how do I connect them?

 

hook up the Positive on the LOC to a Positive of a power source....say, the rear speaker. Negative to Negative.

Remote wire hooks up to the gray

 

So what I could do is wire it to left rear and right rear?

How do I physically connect the wires?

 

help

 

http://home.cfl.rr.com/icdedppl/faq.html#c12

find some tap slices and use them. or you can make a little slit in the isolation around the wire, then solder the new wire onto that then wrap with electrical tape.

 

just to one. i.e- using just the left rear speaker tap into the negative and positive.
i have these taps:

http://www.radioshack.com/product/in...entPage=search

 

Thank you so much! I will do that tonight!