Notices
Scion tC 1G ICE & Interior In-car entertainment and electronics...

HELP: undercar lighting setup

Old Feb 24, 2006 | 09:26 AM
  #1  
Mexicola420's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2006
Posts: 120
From: Austin, Texas
Default HELP: undercar lighting setup

i recently bought a blue undercar kit and im about to install it but i noticed there really is no place to ount them under the tc... those of you who have undercar neons, could you maybe post pics so i can see how and where you installed them??
Old Feb 24, 2006 | 02:35 PM
  #2  
krdshrk's Avatar
Senior Member
10 Year Member
5 Year Member
Scikotics
SL Member
Team ScioNRG
 
Joined: Sep 2005
Posts: 3,712
From: New Brunswick, NJ
Default

On the sides of the car there's a nice little groove where the side bars will fit. Rear bar I didn't screw in... i just used 3m Double-sided mounting tape/foam.

Front bar I zip-tied to the support bar in front of the radiator.... it shines out my lower grille..
Old Feb 24, 2006 | 09:56 PM
  #3  
Mexicola420's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2006
Posts: 120
From: Austin, Texas
Default

thanx... but do you think you could post pics?
Old Feb 26, 2006 | 08:04 AM
  #4  
Mexicola420's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2006
Posts: 120
From: Austin, Texas
Default

*BUMP* could anyone post some pics? *BUMP*
Old Feb 26, 2006 | 02:41 PM
  #5  
PRE5TON's Avatar
Senior Member
5 Year Member
SL Member
 
Joined: Mar 2005
Posts: 363
From: Chandler, AZ
Default

I went through all my old posts and found an old writeup I gave to Limey to help him install his underbodys and he gave me his writeup for the fog lights. It's farther down on the page. Hopefully this helps.

https://www.scionlife.com/forums/vie...=asc&&start=25
Old Feb 26, 2006 | 03:12 PM
  #6  
Mexicola420's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2006
Posts: 120
From: Austin, Texas
Default

Thanx bro ! ive been sittin here for days wantin to install them.... but now im gunna have to wait for the rain to pass.....
Old Feb 26, 2006 | 04:02 PM
  #7  
PRE5TON's Avatar
Senior Member
5 Year Member
SL Member
 
Joined: Mar 2005
Posts: 363
From: Chandler, AZ
Default

No problem - Goodluck with it. It isn't too difficult, just time consuming. HAVE FUN!
Old Feb 27, 2006 | 04:31 AM
  #8  
Oznium_com's Avatar
Former Sponsor
10 Year Member
5 Year Member
Scikotics
SL Member
 
Joined: Apr 2005
Posts: 849
From: Bay Area, CA
Default

There is plenty of room under the tC. One of the easier cars for mounting UB kits!

If it is an LED kit, put the tube further into the car... And angle the LEDs outward.



Old Feb 28, 2006 | 10:24 AM
  #9  
Mexicola420's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2006
Posts: 120
From: Austin, Texas
Default

hey Oznium_com.... dont you think that the rear light will melt being on the shield for the cat conv???? i already have the side ones in and were working on the switch right now... ill try and post some pics when its done
Old Feb 28, 2006 | 05:58 PM
  #10  
Oznium_com's Avatar
Former Sponsor
10 Year Member
5 Year Member
Scikotics
SL Member
 
Joined: Apr 2005
Posts: 849
From: Bay Area, CA
Default

No, it won't melt at all. Just be careful with the wire, and routing it.
Old Mar 1, 2006 | 07:02 AM
  #11  
Mexicola420's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Feb 2006
Posts: 120
From: Austin, Texas
Default

thanks man.... i got the side ones in fine and im about to put in the front and back... ill try and post pics when im done
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wiltonhall
Scion xA/xB 1st-Gen ICE & Interior
4
Jun 23, 2025 10:09 PM
jthistle
Scion xB 2nd-Gen Suspension & Handling
9
Mar 11, 2016 03:12 PM
my06tc
PPC: Engine / Drivetrain
10
Jun 25, 2015 12:18 AM
XB06
Scion xB 2nd-Gen ICE & Interior
1
May 30, 2015 02:42 AM
gettoastedinthetoaster
Scion xB 2nd-Gen Wheel & Tire
4
Dec 29, 2014 11:39 PM


Thread Tools
Search this Thread

All times are GMT. The time now is 12:19 AM.