kenwood ddx 6019
hey guys , i just bought a kenwood ddx 6019 from my friend. and i really would like to install....i bought then DD kit from CrutchField, with this i can close the door right?
and i bought the wiring harness...is this all i need for the install?
any tips? thanks guys !!
and i bought the wiring harness...is this all i need for the install?
any tips? thanks guys !!
Originally Posted by ISTCIONI
hey guys , i just bought a kenwood ddx 6019 from my friend. and i really would like to install....i bought then DD kit from CrutchField, with this i can close the door right?
and i bought the wiring harness...is this all i need for the install?
any tips? thanks guys !!
and i bought the wiring harness...is this all i need for the install?
any tips? thanks guys !!
all in all im real happy with it...good luck on your install
Senior Member



Fail, INC
SL Member
Joined: May 2005
Posts: 9,975
From: Nice little room with padded walls
all you need to do is swap over your factory radio brackets... you can position these many ways so be careful you get them identical.. if you set it back a little bit you should be just fine with the door...
ISTCIONI
u need only to drill out the indentions that are on the factory brackets. u will only put 2 screws (4total) into each side of the radio (thru brackets) i have the ddx7019 which is pretty much identical install and i re-used the metra side trim to fill the gaps. it works great. u will need to dremel off the washers from the factory screws to get the screw head to fit with the metra gap-trim. i used a cutting wheel and notched the washer (watch out for the threads!) then i used some needlenose and vise grips to tear the washer off. dont try to unscrew the washer from the screw, u will strip the threads (DOH!)
oh yeah, with the metra gap-trim, u will need to cut off two of the mounting arms, they are the ones that dont sit flush on the side of the stereo. also, i think the holes dont line up right with the two u cut off...
sidenote, the track back button kinda works with the kenwoods (pacswi) u will just have to hit it more than u are accustomed (that's what she said! heh heh). usually i hit it once or twice to the beginning of the song and then pause very briefly and hit it one more time....
good luck and pm me if u need any more pointers
u need only to drill out the indentions that are on the factory brackets. u will only put 2 screws (4total) into each side of the radio (thru brackets) i have the ddx7019 which is pretty much identical install and i re-used the metra side trim to fill the gaps. it works great. u will need to dremel off the washers from the factory screws to get the screw head to fit with the metra gap-trim. i used a cutting wheel and notched the washer (watch out for the threads!) then i used some needlenose and vise grips to tear the washer off. dont try to unscrew the washer from the screw, u will strip the threads (DOH!)
oh yeah, with the metra gap-trim, u will need to cut off two of the mounting arms, they are the ones that dont sit flush on the side of the stereo. also, i think the holes dont line up right with the two u cut off...
sidenote, the track back button kinda works with the kenwoods (pacswi) u will just have to hit it more than u are accustomed (that's what she said! heh heh). usually i hit it once or twice to the beginning of the song and then pause very briefly and hit it one more time....
good luck and pm me if u need any more pointers
Thread
Thread Starter
Forum
Replies
Last Post
lunchbx05
PPC: Interior / Electronics
0
Dec 11, 2014 06:13 PM
SassyScion
Scion xA/xB 1st-Gen ICE & Interior
3
Apr 9, 2005 06:44 AM
samendolaro
Scion xA/xB 1st-Gen ICE & Interior
8
Jun 13, 2004 01:53 AM
scionmilktruck
Scion xA/xB 1st-Gen ICE & Interior
13
May 17, 2004 05:04 PM




