Notices
Scion tC 1G ICE & Interior In-car entertainment and electronics...

lock topic

Old May 30, 2006 | 08:00 PM
  #1  
nd4spd_4_a_tc's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
Team ScioNRG
 
Joined: Nov 2004
Posts: 452
Default lock topic

LOCK topic
Thanks
Old May 30, 2006 | 08:09 PM
  #2  
JQ's Avatar
JQ
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Mar 2006
Posts: 276
From: Boston, MA
Default

dont quote me on this but I remember the notch being on the bottom facing into the car away from the door. Another thing that you have to look out for regarding the doors is the fact that those leds are oversized. The solder must be enough to get the leads and the led. Examine under the led and make sure the leads are covered.
Hope this helps
Old May 30, 2006 | 08:17 PM
  #3  
nd4spd_4_a_tc's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
Team ScioNRG
 
Joined: Nov 2004
Posts: 452
Default

i checked the notches. Right now on the pass side door.
The window switch led notch is on the bottom facing the pass door.
the lock button notch is on the bottom and facing the pass side door.
I cant get the notch be on the bottom and face inside.

Either bottom right or top left.
Old May 30, 2006 | 08:47 PM
  #4  
nd4spd_4_a_tc's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
Team ScioNRG
 
Joined: Nov 2004
Posts: 452
Default

ok i figured it out.
The notch faces the K on the board. Im guessing that means negitive.

I got the window switch to light up. it blinks for some reson.

Why does it blink?
Old May 30, 2006 | 09:08 PM
  #5  
JQ's Avatar
JQ
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Mar 2006
Posts: 276
From: Boston, MA
Default

u need to reset the power window feature. put the window halfway down. Then put it all the way up and hold for 3 seconds. Repeat for the pass. window as well.
Old May 30, 2006 | 09:34 PM
  #6  
nd4spd_4_a_tc's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
Team ScioNRG
 
Joined: Nov 2004
Posts: 452
Default

that was it

thanks

For any who cares

The notch on the led faces the K on the board.

I just did the driver side in 5 min. Pass side 1 hour haha

thanks for the help JQ
Old May 30, 2006 | 11:31 PM
  #7  
jjos1's Avatar
Banned
SL Member
iTrader: (1)
 
Joined: Sep 2005
Posts: 2,605
Default

Mine next
Old May 31, 2006 | 08:33 AM
  #8  
Somnambulated's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Nov 2004
Posts: 1,787
From: Lake Forest, CA
Default

Is there a how-to up already for this? Sorry, I haven't been through the boards in a while.

Nice. That stupid green in the doors has bugged me for a while now.

At least it's not as bad as my buddy's Celica, with the Orange dash lighting and Green headunit/HVAC.

Or, the Camry, with the White dash lighting and Green headunit/HVAC.
Old May 31, 2006 | 08:47 AM
  #9  
SquallLHeart's Avatar
Senior Member

10 Year Member

5 Year Member

SoCal tC Club
SL Member
Team N.V.S.
Scinergy
Scion Evolution
 
Joined: Oct 2004
Posts: 15,699
Default

yes, there are tech articles already written..

i would've chimed in sooner but was busy.. question's already answered..
Old May 31, 2006 | 11:44 AM
  #10  
nd4spd_4_a_tc's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
Team ScioNRG
 
Joined: Nov 2004
Posts: 452
Default

i have the how to and it sucks.

Does not say what way to install the leds.
Old May 31, 2006 | 05:09 PM
  #11  
SquallLHeart's Avatar
Senior Member

10 Year Member

5 Year Member

SoCal tC Club
SL Member
Team N.V.S.
Scinergy
Scion Evolution
 
Joined: Oct 2004
Posts: 15,699
Default

K for cathode. uhh... notch on led is cathode (or dot, spot, marking)... that's sorta common knowledge... oh well..
Old May 31, 2006 | 09:19 PM
  #12  
mandos's Avatar
Former Sponsor
10 Year Member
5 Year Member

SL Member
Scinergy
 
Joined: Jan 2005
Posts: 2,205
From: Newton, IA
Default

Or just look at the way it was, and reinstall the same way
Old May 31, 2006 | 09:29 PM
  #13  
nd4spd_4_a_tc's Avatar
Thread Starter
Senior Member
10 Year Member
5 Year Member
SL Member
Team ScioNRG
 
Joined: Nov 2004
Posts: 452
Default

There was no notch on the oem smd's. No markings at all.
Sorry.

Its not common knowledge. I guess not everyone is smart as you squallLheart.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
user9430961
Scion xB 2nd-Gen Aero & Exterior
3
Sep 24, 2015 01:09 PM
black_toaster
Scion xB 1st-Gen Owners Lounge
2
Sep 18, 2015 06:16 PM
user9430961
Scion xB 2nd-Gen Aero & Exterior
0
Sep 15, 2015 03:16 AM
Subaru86
Scion FR-S ICE & Interior
0
Sep 10, 2015 08:11 AM
BlingSlade
Scion xB 1st-Gen Owners Lounge
0
Sep 5, 2015 08:52 AM


Thread Tools
Search this Thread

All times are GMT. The time now is 09:51 PM.