I bought a couple of packs of dynamat on ebay pretty cheap. They were the xtreme door kit (12sq ft) and the regular trunk kit (consists of 8sq ft or xtreme dynamat and 12sq ft of regular). I know this is not alot, but it was dirt cheap compared to retail and other ebay prices I couldn't pass up. Where should I put this at?

I don't have a big sound system. It is just some diamond hex comps, diamond d6 coxial and a basslink sub. I just want to have a nice sound. I was thinking about putting the all of the xtreme on the doors for both the inner and outer, using the regular on the rear and whatever is left on the back lid or something.

I am not exactly sure on what is the difference in deading abilities between the regular and the xtreme dynamat. I thought I would ask my fellow tC owners. Thanks in advance.

 

Applying it shouldn't be too hard. I would skip the hatch lid with that little though.

 

here is a how to on deadening doors.... http://www.caraudio.com/forum/showthread.php?t=95925

 

Apply it to the vertical surfaces. The doors and rear quarter panels are where you'll notice the biggest improvements...

 

yes yes. the next step for my car is to finish my stereo system, new amps a new set of components and some dynamat extreme in the doors.

 

if you want the best get damplifier from second skin.