Steering wheel control help(anyone whose gone back to stock)
#1
Steering wheel control help(anyone whose gone back to stock)
I had to reinstall my oem head unit cause someone tried to steal my d3 and damaged it. I had a PAC swi control for the d3 but removed it now the steering wheel controls don't work with the oem headunit
#7
make sure the aftermarket SWC module is completely uninstalled. Wiring behind the radio should look 100% factory. if you left anything in there, chances are that is what is causing it not to work.
there is no programing required, the oem radio should automatically respond.
Things to look for:
When the SWC module was installed some wires were cut, make sure all the wires are reattached correctly. Also some wires were wired together, so make sure they are now separated.
Make sure there is no non factory wiring still attached to the any of the smaller plugs behind the radio.
lastly, make sure all the plugs behind the radio are plugged all the way in. sometimes they appear to be all the way in but remember that sometimes looks can be deceiving.
I believe if you follow these tips, you will get your swc working again.
there is no programing required, the oem radio should automatically respond.
Things to look for:
When the SWC module was installed some wires were cut, make sure all the wires are reattached correctly. Also some wires were wired together, so make sure they are now separated.
Make sure there is no non factory wiring still attached to the any of the smaller plugs behind the radio.
lastly, make sure all the plugs behind the radio are plugged all the way in. sometimes they appear to be all the way in but remember that sometimes looks can be deceiving.
I believe if you follow these tips, you will get your swc working again.
Thread
Thread Starter
Forum
Replies
Last Post
fur_pig
Scion tC 1G Suspension & Handling
8
03-20-2020 04:28 PM
Beesh
Scion xA/xB 1st-Gen ICE & Interior
3
01-09-2015 06:30 PM
armyrockmorales
Scion xB 2nd-Gen Owners Lounge
0
12-28-2014 10:39 PM