my friend says i could trip a wire for my airbag's and im a little freaked out, i searched but i went threw 4 pages and got annoyed...

any how to's?

or anytihng i should know, i will be doing sunday,

all help appreciated. : )

 

front bumper right ?? ive never heard that...this is an article in tech seciton, it only takes like 10 min to do

 

The airbag ____ i believe is behind the bumper, on the chassy.

Cause if it connected to the actual plastic bumper, your airbags would go off even if you just get into a fender bender.

 

I just did this on my tC. Just remember once the bolts are removed, you have to disconnect the bumper from the plastic clips (the bolts screw into the clips). Use a screwdriver to move the clips over . Also remember to unbolt at the fender well and remove the bolt that is kind-of hidden inside the bumper on the passenger and driver's side. Honestly it's very easy. Just remember to keep up with which bolts go where.

The airbag sensors ARE NOT on the bumper. The only thing I had to disconnect from the bumper were the fog lights. You will see one sensor on the chassis ground wall's ajoining wall near the front (The same wall I think, if you have moved the ground during the Injen CAI install -which I guess makes bumper removal tips a moot point since you've already done it )

Hope that helps some. Check the reviews of the Injen CAI on this site, I think that someone tells you exactly how many bolts and clips there.

 

thanks for the info guy's

im gonna do it myself, and make myself learn my car. since i was fired from my job, i have all the time in the world now!

merry christmas. hahaha

wheres that bumper info in the faq section, cant find it?

 

basicly 2 bolts in each wheel well and under the car i think there are like 10 and then 5 clips under the hood and it pops right off

i have taken it off a crap load of times for my grill and my intake and other intakes i have made and installed so dont worry no airbags will go off

 

i cant find that how 2, i looked for like an hour

i also need to know what tools im gonna need. so my boy can get them from his shop?

Can anyone help me out with this?

 

: ( Bump

 

email this guy: sciontc15@yahoo.com
he has the instructions on pdf.

 

thank u dude : ) i hope he gets it before sunday or im Screwed. : (

 

dude just email me (aarontrini85@yahoo.com) tonight ill send them to you but basicly i gave you all the instructions above lol

but a flat head screw driver, a philips screw driver, a 1/2 inch rachet will work with 10mm deep well socket or a 10mm with a extension


this is easier then taking off the center console or hell a rim lol and i guess if you havent done either of thoughs you might not get the joke but its easy as hell trust me

 

the froums are slow today so i figured i would search for this in the tech section and bam not even 30 sec to find it on the T1 at my work even though scionlife has been slow as crap for the past few months https://www.scionlife.com/forums/viewtopic.php?t=44668



go to features and tech at the top of the screen its in there

 

thank u guys sooo much, lol

iv been bugging out all day.

Thank you thank you thank you

haha

 

Did you get my email? if not, let me know and I'll send it again, lates.