Notices
Scion tC 1G Owners Lounge
2005-2010 [ANT10]

coin/cell phone holder help

Thread Tools
 
Search this Thread
 
Old Oct 14, 2010 | 01:57 AM
  #1  
jabba22's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2010
Posts: 4
Default coin/cell phone holder help

hey guys,

I have a 2006 tC, and the coin/cell phone holder in front of the cup holders is stuck, probably because a coin is stuck in there. I did search, and found a few other topics from awhile back about this, but i wasnt totally clear on how to take apart the dash to fix this. I didnt want to just start pulling stuff off at random and hope it would work. Specific instructions on what i can do would be greatly appreciated. Thanks
Old Oct 14, 2010 | 01:59 AM
  #2  
SquallLHeart's Avatar
Senior Member

10 Year Member

5 Year Member

SoCal tC Club
SL Member
Team N.V.S.
Scinergy
Scion Evolution
 
Joined: Oct 2004
Posts: 15,699
Default

yank out bottom part of waterfall (the panel around the shifter)

then yank the entire cupholder panel piece out.
Old Oct 14, 2010 | 02:02 AM
  #3  
JCarroll839's Avatar
Member
5 Year Member
SL Member
 
Joined: Jul 2010
Posts: 89
From: Whitehouse, TX
Default



How did you get a coin jammed in to make it stuck in there like that?



The iPhone holder is probably the most useful thing I've ever gotten from the dealership though...
Old Oct 14, 2010 | 02:04 AM
  #4  
RS2_1823's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
 
Joined: Mar 2010
Posts: 848
From: Slower Dover, DE
Default

The coin holder is just plastic.. take a small screwdriver (flathead) and pry up one side of the part that flips up. I dnt think there is a need to remove the cup holder itself..
Old Oct 14, 2010 | 02:27 AM
  #5  
jabba22's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2010
Posts: 4
Default

the coin was my brothers doing .

@SquallLHeart
SO pull off the two lowest silver pieces and then the part with the cup holder? is there any real danger in breaking anything?
Old Oct 14, 2010 | 01:25 PM
  #6  
StatuSCheckA's Avatar
Senior Member
10 Year Member
5 Year Member
SL Member
iTrader: (1)
 
Joined: Aug 2005
Posts: 779
From: Texas
Default

Toyota plastic...yes there is a danger of breaking something.
But our whole console area comes apart with like 2 screws. I think you can figure that out, just start pulling crap off, you'll find it easy.
Old Oct 14, 2010 | 01:30 PM
  #7  
highvoltage1's Avatar
Senior Member
10 Year Member

5 Year Member
SL Member
iTrader: (11)
 
Joined: Mar 2007
Posts: 6,550
From: Tampa area
Default

Do what Squallheart said! you will be fine.
Old Oct 14, 2010 | 02:26 PM
  #8  
SquallLHeart's Avatar
Senior Member

10 Year Member

5 Year Member

SoCal tC Club
SL Member
Team N.V.S.
Scinergy
Scion Evolution
 
Joined: Oct 2004
Posts: 15,699
Default

Originally Posted by StatuSCheckA
Toyota plastic...yes there is a danger of breaking something.
But our whole console area comes apart with like 2 screws. I think you can figure that out, just start pulling crap off, you'll find it easy.
there's NO screws when pulling the cupholder panel piece out.

just two pieces to pull.. lower waterfall/shifter part..
and the cupholder part with the small storage compartment with the stuck lid.

just pull the lower waterfall piece up and backwards. that's really the most "difficult" part... it takes me literally less than 10 seconds to yank both of those pieces out.. with maybe an extra second if i wanted to get the upper waterfall piece out.

there's the cigarette lighter cable you can disconnect or not, but you can just move the panel piece out of the way for you to get to the cupholder. pull up on the parking brake so you can slide it up and out easier.

there's really nothing special or tricky. just yank the damn thing apart.
Old Oct 14, 2010 | 02:47 PM
  #9  
JCarroll839's Avatar
Member
5 Year Member
SL Member
 
Joined: Jul 2010
Posts: 89
From: Whitehouse, TX
Default

Originally Posted by SquallLHeart
there's NO screws when pulling the cupholder panel piece out.

just two pieces to pull.. lower waterfall/shifter part..
and the cupholder part with the small storage compartment with the stuck lid.

just pull the lower waterfall piece up and backwards. that's really the most "difficult" part... it takes me literally less than 10 seconds to yank both of those pieces out.. with maybe an extra second if i wanted to get the upper waterfall piece out.

there's the cigarette lighter cable you can disconnect or not, but you can just move the panel piece out of the way for you to get to the cupholder. pull up on the parking brake so you can slide it up and out easier.

there's really nothing special or tricky. just yank the damn thing
apart.

Usually people have a heart attack in anything that involves yanking anything off with a bunch of force on their first time doing it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sgtfluffy16
Regional - Northeast
3
Jul 28, 2021 10:32 PM
SloTC1
PPC: Engine / Drivetrain
14
Aug 16, 2018 02:45 PM
Sgtfluffy16
Off-topic Cafe
2
Sep 30, 2015 01:42 PM




All times are GMT. The time now is 04:29 PM.