after installing the injen CAI, my passenger side window wouldnt close using the drivers side switch to close it. it only works on the passenger's side. also it wouldnt close automatically unlike before, you gotta hold the switch up unlike before. before, all i had to do was tap it and it automatically goes up or down. maybe its because of taking out the batter to make room for my intake to pass threw?(of course i put the battery back)
if anyone knows how to fix this problem pls tell me.

 

sa-weet, haven't seen a post about this since.. 6 hours ago about?

Do a search on window problem. It's not a problem, you just reset your ECU when you unplugged your battery. Search, and the method to "fixing" it will be found.

 

Step 1: go to the passenger side window, roll it all the way down and all the way up, hold it for like 5 seconds, go to the driver side and repeat.

Step 2: Thank me .

 

yeah it happens everytime you disconnect the battery it fixes itself dont worry.

What i wonder is why you disconnected your battery to install an intake

 

removing the battery helps with getting the cai pipe through the hole the body. Plus resetting your ecu is good prior to startup after any performance mod.

 

please don't spam the boards.

https://www.scionlife.com/forums/vie...329&highlight=

locked.