i wanna get the umintza halo kits for my headlights and the directions require me to put my lights in the oven and open it up yadi yadi ya but i wanna know if anyone has the halo kits tell me how it is or if i do the kit will my lights fog up when i close them up i dunno someone help

 

Ok I just had to bake my headlights to install clear corners. When you put them back together leave as much of the original silicone as you can on the housing. I used a clear silicone that I got at Auto Zone additional to the original, throw a couple of silca packets in there ( what you find in new shoes that says don't eat), put the lights back together, squeeze them as tight as you can, then bake them at 225 degrees for 5 minutes. when done tighten all the screws up and run some addition silicone around the housing between the lens and housing.

 

Do a little research.

https://www.scionlife.com/forums/vie...590&highlight=

You dont have to worry much about the headlights fogging up, there's enough residual OEM sealant there to ensure a proper seal once you put the headlights back together. Any questions, shoot me a PM.