Well i'm still installing my sound system. While testing everything on the car making sure everything works. The driver side the controls to roll down/up is not 100%. I can Lock/unlock doors, I can roll down and roll up the driver side window. I can luck/unluck the windows but i can roll down or roll up the window on the passgner side. I ran new wire to the door and must likey cut or disconnect a wire. What wire color's control l the passegner window? Also I'm installing a ddx-8017. Which is the wire coming from the factory wire harness that for the steering controls?

 

So in doing this, you disconnected the battery right? And now your windows/sunroof don't work?

 

Well the sunroof works, and i can roll down the Passen. window from the passenger side door. I can't roll it down from the driver side. The driver side windows work.

 

bumb

 

bumber

 

Sounds like you have to re-initialize your windows. Look in the car manual or do a search, there are many posts about it.

 

This just happened to me. Go to your passenger side and roll down your window and keep holding the switch for five seconds after its rolled down. Then roll it up and again hold it for 5 seconds after its all the way up. Now your driver side switch should be working.

 

actually, you have to roll down the window half way down, and then raise it all the way up and hold onto the button for about 5 seconds. for the passenger door you have to do it on the passenger side. same with the sunroof and such.

 

Don't forget to reset your Hatch as well as the windows and moonroof. Now, LOCK this puppy!

 

What hatch you talkin about?

 

Hatch, trunk, all the same.

 

^^We don't have no stinkin' trunk! It's a "Hatch".

 

I had to do the same thing

 

you dont actually have to roll the window down at all, just hold the button up
for a few seconds