I have to replace my front wheel bearings this weekend. There are a handful of torque to yield parts and cotterpins that cannot be reused... Does anyone know the part # or specs of these bolts/cotterpins etc? I don't have a repair manual...Thanks!

 

Go to the dealer.... They will show you every part number and price for each item.

 

All you'll need to replace is the bearing, seals [they might come with the bearing, don't know] and the cotter pins for the outer tie rod and lower ball joint.
Depending how you treat the axle nut you might or might not be able to reuse it.

This also of course assumes you don't damage anything like the axle threads, outer tie rod or ABS sensor.

 

thanks guys

 

If anyone else is gona try this....

you need

new bearings, new cotterpins, new snaprings (To retain the bearings) and new axle nuts (probably)

the wheel studs on my car were reuseable

also, the socket to get the axle nut off is like a 32mm 12 point!!!! so find some big metric 12s first!!!

 

I forgot about the C clip [Snap Ring], sorry.

The axle nut is a 30MM 12 point [OEM anyways, if you have an aftermarket axle or nut it could be a different size].

 

make a guide. i'll put it in the tech section