2006 tC Inner Tie Rod Torque Specs?
#1
2006 tC Inner Tie Rod Torque Specs?
Does anybody know what the inner tie rod torque specs are for a 2006 tC?
Thanks!!
*Moved to Correct Forum by Administrator
Sticky Where to Post Your Question
______________________________
Thanks!!
*Moved to Correct Forum by Administrator
Sticky Where to Post Your Question
______________________________
Last edited by MR_LUV; 10-03-2018 at 09:52 AM. Reason: Moved to Correct Forum by Administrator
#2
I've never torqued an inner tie rod. Do you have an inner tie rod tool? I always just use a pair of channel locks and tighten them down as tight as I can. I've honestly never heard of torquing an inner tie rod........ (I was an auto mechanic for 5 years, and went to auto tech school as well) bump for some useful information if anyone has any
#3
According to 2007 tC service manual:
Inner tie rod torque: 73 N*m (744 kgf*cm, 54 ft.*lbf)
Tie rod adjusting tube set-nut torque: 56 N*m (571 kgf*cm, 41 ft.*lbf)
Tie rod end lock nut torque: 74 N*m (755 kgf*cm, 55 ft.*lbf)
Tie rod end castle nut torque: 49 N*m (500 kgf*cm, 36 ft.*lbf)
Inner tie rod torque: 73 N*m (744 kgf*cm, 54 ft.*lbf)
Tie rod adjusting tube set-nut torque: 56 N*m (571 kgf*cm, 41 ft.*lbf)
Tie rod end lock nut torque: 74 N*m (755 kgf*cm, 55 ft.*lbf)
Tie rod end castle nut torque: 49 N*m (500 kgf*cm, 36 ft.*lbf)
Thread
Thread Starter
Forum
Replies
Last Post
SandsMan
Scion tC 1G Suspension & Handling
5
04-09-2007 08:24 PM