i made the mistake of lowering my car without getting my wheels aligned afterwards. it has since been a few thousand miles and the inside of my tires (all 4) are worn down pretty good. it is the inside inch that is worn down to no tread. do i have to by a new camber kit to fix the tilt or can i just get an alignment and have it be fixed. need help. thanks guys

 

dang, you must've gone real low. Camber is adjustable so you may get away with having an alignment done and not need any aftermarket parts.

 

no i just got h-techs put on...not too bad

 

h-techs camber can be corrected with alignment... as far as i know

 

buy new tires and get an alignment

 

i'm dropped on ssp and my camber in the back is 2.5 on both wheels so i ordered camber links from hotchkis

 

Jesu Cristo. I've only said this a tousand times, so what's one more? Toe out wore your tires, not camber. You can run -3.0º of camber all the way around and your tires will wear just fine. But even 1/16" toe out will eat the insides of your tires off.

Get the toe corrected.

 

rotate tires and alignment

 

just straight up get a full alignment which does camber and toe...and of course, buy new tires...wouldnt want to have a flat anytime soon >_> no aftermarket camber links needed