just got my tc back from the shop. thanks to my friends at eurosports in eugene ,oregon for a fast install. all done in 2 hours. i got exactly what i wanted from my new trd springs. subtle drop with improved handling. the only problem was the alignment shop couldn,t adjust the rear camber to spec. he said there was no adjustment. is he wrong? rear camber is at -1.5 in the rear. i should call toyota about this since there seems to be an adjuster back there but it won't move. any ideas?

 

well you didnt drop it alot so the rears should be fine? No need for that!

 

pictures?

 

PLEASE tell me how to attach pics to my posts!!!!!

 

read these instructions:

https://www.scionlife.com/forums/viewtopic.php?t=60317

 

That link was on your other thread too.

 

i just had my trd springs installed as well. i immediately noticed some slight negative camber in the rear. i thougth trd springs didn't cause this? aside from this the drop looks clean.

 

this might be kinda off topic but does the trd drop allow you to park over those parking curbs without scraping the front bumper?


how many inches of clearance does it have with the trd drop from the bottom of the bumper to the ground? thanks

 

At first when I saw the drop, I didnt think I could get past those parking blocks. But just yesterday I accidentally pulled too far over one and I cleared it. Just barely though.

 

Contact Ingalls. They have cam bolts for the front and rear. I belive they are about 30 bucks a set and you can adjust for 0"-2" drop.